Omen Valve Stem

The_Hyren · 03-27-2019, 04:03 PM

Was cleaning a fixing up an omen for a buddy and low and behold it was missing a valve stem. Borrowed one from my pimp collection as they looked the same but it leaks. Any info on if these are interchangeable and what if any other cupseals will fit?

cyberpyr8 · 04-04-2019, 04:18 PM

Palmer's actually did a run for Kbeam04 on PBN and I had about 4-5 of them He had the rest. Reach out to him and see if he has any left or can get you in touch with the guy at Palmers to get some more. The Pimp and Omen seals are the same though. Is it airing down the barrel?

The_Hyren · 04-05-2019, 12:59 PM

That would be nice. Ill have to contact him. Thanks for the lead. I assumed the pimp and omen ones where the same but all the pimp ones Ive tried still leak. The omen's valve body doesnt appear to be damaged along the sealing surface so Im not sure why its still leaky. I already rebuild the whole thing with new rings so its not that either.

cyberpyr8 · 04-07-2019, 06:47 PM

I have found that they can work fine in one gun and not another. They look fine but won't seal correctly.

The_Hyren · 04-09-2019, 12:39 PM

Yea. finicky. I fingered the valve body and its not beat up at all so Im going to swap around the others I have and see what works. I was also think it might not seal at the 100psi shop pressure I was using, maybe a 400psi would form it.

What pressure do omens run normally?

jerryjjackson69 · 04-09-2019, 02:16 PM

Mine are happy between 300-400 PSI. When the tank runs low and pressure drops below 150 PSI I do often get a valve leak. That may be your issue

The_Hyren · 04-18-2019, 09:01 AM

Thanks for your guy's help. I did get one to work. I played musical poppits with my markers and spares and managed to find a combo that got everything sealed up.

03-27-2019, 04:03 PM	#1 (permalink)
The_Hyren Active Member Join Date: Jun 2012	Omen Valve Stem Was cleaning a fixing up an omen for a buddy and low and behold it was missing a valve stem. Borrowed one from my pimp collection as they looked the same but it leaks. Any info on if these are interchangeable and what if any other cupseals will fit?

04-04-2019, 04:18 PM	#2 (permalink)
cyberpyr8 Instagram:@evil_paintball Join Date: Aug 2016 Location: Statesboro, GA	Palmer's actually did a run for Kbeam04 on PBN and I had about 4-5 of them He had the rest. Reach out to him and see if he has any left or can get you in touch with the guy at Palmers to get some more. The Pimp and Omen seals are the same though. Is it airing down the barrel? __________________ ------------- Gear: Gray/Red LV1 - 68/4500 Ninja SL Tank \| Skull 9V Z2 Clothing: Push Unite Grey/Red Mask \| Exalt Bounce Cap \| Jerseys Clinic Jersey \| Evil Pants \| Exalt T3 Arm Pads Sales and repairs: https://segapb.com

04-07-2019, 06:47 PM	#4 (permalink)
cyberpyr8 Instagram:@evil_paintball Join Date: Aug 2016 Location: Statesboro, GA	I have found that they can work fine in one gun and not another. They look fine but won't seal correctly. __________________ ------------- Gear: Gray/Red LV1 - 68/4500 Ninja SL Tank \| Skull 9V Z2 Clothing: Push Unite Grey/Red Mask \| Exalt Bounce Cap \| Jerseys Clinic Jersey \| Evil Pants \| Exalt T3 Arm Pads Sales and repairs: https://segapb.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

04-05-2019, 12:59 PM	#3 (permalink)
The_Hyren Active Member Join Date: Jun 2012	That would be nice. Ill have to contact him. Thanks for the lead. I assumed the pimp and omen ones where the same but all the pimp ones Ive tried still leak. The omen's valve body doesnt appear to be damaged along the sealing surface so Im not sure why its still leaky. I already rebuild the whole thing with new rings so its not that either.

04-09-2019, 12:39 PM	#5 (permalink)
The_Hyren Active Member Join Date: Jun 2012	Yea. finicky. I fingered the valve body and its not beat up at all so Im going to swap around the others I have and see what works. I was also think it might not seal at the 100psi shop pressure I was using, maybe a 400psi would form it. What pressure do omens run normally?

04-18-2019, 09:01 AM	#7 (permalink)
The_Hyren Active Member Join Date: Jun 2012	Thanks for your guy's help. I did get one to work. I played musical poppits with my markers and spares and managed to find a combo that got everything sealed up.