Tech drawing of a PPS Blazer's profile
i have a number of projects under way,
does anyone out there have a tech drawing of a PPS Blazer?
i need top, bottom, front, back and both side views of the exterior of the gun
including barrel, body and grip frame (standard and 45 double trigger)
i would draft this up myself but i don't have one in hand at this time.
I doubt the external dimensions are accurate to three decimals. They appear to be cast or roughly extruded, then bored and cut. The outside is pretty rough.
Just goes to show that PPS knows what actually counts. :D
but i still need the 6 view drawing with measurements!
seems like that would take some time to do by someone capable and applying due diligence. if you're experienced it might be as time effective to acquire a used one cheaply.
i could photograph a blazer or the BlaziCane, but that's not a drawing.
I wouldn't be opposed to giving it a shot, but it would take a while, yes.
I think anyone who complies with this request risks a blacklisting at Palmers Pursuit Shop.
Just a guess, of course, but why run such a risk?
i'm trying to make a body/stock that will fit a Blazer,
i'm not building a Blazer itself.
i don't have the cash to buy a Blazer just now so i'm trying to do this from diagrams.
i'm not stepping on anyone's toes or ripping anything off.
in fact, i hope someone doesn't step in and beat me to the punch.
below is kinda sorta what i'm thinking about:
what you talkin bout willis
Man that body would be HUGE
wait. is that giant gray amoeba th body?? I thought it was just some color contrast for the background.
|All times are GMT -4. The time now is 08:34 PM.|
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC