Thread Tools Search this Thread
Old 07-13-2018, 04:09 PM   #1 (permalink)
paintball designs
apoc4lypse's Avatar
Join Date: Jul 2009
Location: Las Vegas, NV

If you have Lever Changer sealing issues...

Here's a tip if you are having sealing problems with your new ICD lever changer.

In my last batch of lever changers for my Phantom side-saddle air systems, I noticed that a few of the changers would not consistently seal against the face of the 12g.

I took them apart and compared them to the working lever changers and discovered that on the faulty ones, the milling inside the ASA housing was too deep. That meant the spring and floating pierce pin assembly had too much play, resulting in a loose/faulty seal.

To remedy this, I added some small washers to act as shims between the internal shoulder and the spring. It worked like a charm. This trick may also help if your 12g seal is worn down.
apoc4lypse is offline   Reply With Quote
Old 07-13-2018, 08:17 PM   #2 (permalink)
MCB Member
Join Date: Apr 2006
Location: Saugus MA

The original Line SI lever changers has some strange problems. Leland 12 grams would only seal without the seal, Crosmans, only with the seal.
Fearlessly, the idiot faced the crowd, smiling...
THE-SHOOTIST is offline   Reply With Quote
Reply » Paintball » The Armory » ICD

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump

All times are GMT -4. The time now is 12:31 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC