| ||Thread Tools||Search this Thread|
|01-29-2019, 06:42 PM||#11 (permalink)|
Join Date: Aug 2010
Thought about it a little last night. I have access to a lathe and heat treating furnace at work. I can make a slightly over-sized hardened pin and then ream out the hole in the Trigger Plate to fit. The only thing that might go wrong is that I'll lose a finger... Or light myself on fire... Either way, it's a small price to pay.
Last edited by eclecticdialect; 01-29-2019 at 11:37 PM.
|01-29-2019, 11:05 PM||#12 (permalink)|
Does anyone read this?
Join Date: Jul 2006
Location: Jordan Station, Ontario, Canada
Just remember, even if you lose one finger, you still have 9 left.
|01-30-2019, 09:14 AM||#13 (permalink)|
Join Date: Dec 2008
Location: Houston, TX
and if you don't cauterize it on the furnace, you might be able to put it back on.
You could try softening the end of the original and squaring it in a vice. It wouldn't need hardening if the middle where the sear runs is still good.
some things are stickier than others
Last edited by Spider!; 01-30-2019 at 09:17 AM.
|01-30-2019, 11:25 AM||#14 (permalink)|
Corpses Eaten: 0
The day I tried to live
I wallowed in the blood and mud with All the other pigs
Singing One more time around
Might do it
One more time around
Might make it
RIP Mr. Cornell. thank you.
My Feedback: https://www.mcarterbrown.com/forums/s...3932#post13932
|Thread Tools||Search this Thread|