mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 08-31-2017, 11:25 AM   #1 (permalink)
I see dead people
 
chopper duke's Avatar
 
Join Date: Jun 2008
Location: Metro ATL

CCM Fan
My Inception/ CCM pump project

So I've got a big game coming up at the end of Sept and since I haven't played in like 5.5 years, my gear and equipment had dwindled to basically nothing. I knew I wanted to take a least one pump and since I sold my T2 to buy real steel toys I needed to come up with something.

Found this body here in the BSTs and contacted the seller. We worked out a deal for the body, CCM 86 frame and he tossed in a CCM bolt 'cause he's a cool dude.

I was going to go with AKA internals but since he tossed in the CCM bolt I decided on CCM parts. I mean, they're the pump gods so why not. The plan is CCM lowers, CCM dust black reg and CCM Pump kit.

Here's the tough part, EZ pump handle or standard? I had the EZ on my T2 and really liked it but Hitman Mods for the standard are far more common.

I have a dust black Freak back and a dust black teardrop front on the way to me.

Anyway, here's the current progress pic (WGP reg is there for display purposes only as it's non-functioning).

__________________
chopper duke is offline   Reply With Quote
Old 09-01-2017, 12:47 AM   #2 (permalink)
Patient Zero
 
Tracker's Avatar
 
Join Date: Apr 2006
Location: Las Vegas NV
Send a message via Yahoo to Tracker Send a message via Skype™ to Tracker

CCM Fan
i still think the EZ-T was their best handle design

id say go EZ, hes also offering them hallowed out for a pretty decent weight savings
__________________

^And i did it while wearing a helmetcam^ in 1080P HD if you need proof
Trackers feedback
Tracker is offline   Reply With Quote
Old 09-01-2017, 08:50 AM   #3 (permalink)
Fluffy Bunnies for life!!
 
Jkoselka's Avatar
 
Join Date: Jul 2010
Location: Formerly Green

CCM Fan
I think Pumphaus Designs has a hitman for the EZGrip. I personally like the EZ over the standard and with the Inception body would look better, IMHO.
__________________
America is all about speed. Hot, nasty, bada$$ speed. -Eleanor Roosevelt, 1936
FLUFFY BUNNIES PUMP

Ebay Feedback
MCB Feedback
Jkoselka is offline   Reply With Quote
Old 09-01-2017, 10:37 AM   #4 (permalink)
Merc
 
JOESPUD27's Avatar
 
Join Date: Apr 2006
Location: St. Louis Area
Send a message via AIM to JOESPUD27

I'd go all Inception.
JOESPUD27 is offline   Reply With Quote
Old 09-01-2017, 11:20 AM   #5 (permalink)
I see dead people
 
chopper duke's Avatar
 
Join Date: Jun 2008
Location: Metro ATL

CCM Fan
Quote:
Originally Posted by Tracker View Post
i still think the EZ-T was their best handle design

id say go EZ, hes also offering them hollowed out for a pretty decent weight savings
Quote:
Originally Posted by Jkoselka View Post
I think Pumphaus Designs has a hitman for the EZGrip. I personally like the EZ over the standard and with the Inception body would look better, IMHO.
I talked to Bill last night and I'm going with the standard. I posted up in the CCM forum and a lot of guys felt the same there. I like the rounded front on the standard for the way I shoot and adding a Hitman allows me to squeeze off a few quick shots and also serves as a handstop for when I'm wasting paint with the AT.


Quote:
Originally Posted by JOESPUD27 View Post
I'd go all Inception.
Initially that was the plan but I got a good deal on the body and frame and the seller threw in a CCM bolt. I figured CCM knows their pumps and it's gonna be a pump so why not. Plus, the Inceptions pump kit (while nice) is a bit pricey.

I've ordered all the parts I need save for the detent. I think I'm going to go with a CP detent unless someone has a better recommendation.
__________________
chopper duke is offline   Reply With Quote
Old 09-22-2017, 11:10 AM   #6 (permalink)
I see dead people
 
chopper duke's Avatar
 
Join Date: Jun 2008
Location: Metro ATL

CCM Fan
Well, I've got it all buttoned up now. The reg had a torn o-ring in the middle (which I found out getting ready for a game). That's all fixed and she's ready to go. Kinda. While chasing down leaks I inadvertently tore one of the o-rings in the CCM Fittings and left my spares at home.

Anyway, here she is:
My CCM'd Inception body (all dust/ matte black)
  • Inception Kryptonite Full Body
  • Empire Feedneck
  • CCM Bolt and Pin
  • CCM 86* frame
  • CCM 2K Pump kit
  • CCM AT Lever
  • CCM lower internals
  • CCM IVG
  • CCM Cocking Rod
  • CCM Regulator
  • CCM Fittings (only one shown because I tore an o-ring in one chasing a leak)
  • PE OOPS on/off
  • CP detent
  • SP Freak back
  • SP Teardrop Freak tip
  • Ty's Ti .680 freak insert

__________________
chopper duke is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » Inception Designs

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 10:49 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC