I just picked up an electra 08 the other day and it had a nasty snappy trigger pull, not smooth at all, can you adjust it to be smoother or will it break in over time. I wan't to buy it or a mokal aura, the trigger pull is the deciding factor, as I only play semi.
I would assume it's adjustable, most of the E-framed spyders have either set screws accessible from the outside, or a screw inside which you can adjust to move the trigger closer to or farther from the switch point. If you don't have visible set screws, take the frame off, and look at how the trigger is installed. You could also invest $10 in a lighter (50 or 25g) microswitch, if the stock one is too heavy. Not sure what you mean exactly by "nasty snappy", electro triggers more or less feel the same to me with the exception of how close to the switch it's set up, and the force needed to trip the switch.
Pictures would be helpful too.
well the 08 electra has a 3-way adjustable magnetic sabre trigger. So there is some way to adjust it. Don't know exactly as I have not held one. But a couple guys over on the kingman forums at pbnation have them and love them. Pop over there and look around.
kingman has a video about the electra.
it tell how to adjust the trigger and other stuff about the electra.
i will give you a link.
Spyder.tv - Spyder Electra Paintball Marker
For the post travel set screw or closest to the trigger switch, turning it counter clockwise or out to reduce post travel.
|All times are GMT -4. The time now is 12:37 PM.|
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC