|Mechanical Semi-Autos Show us what you've got, and sell them here.|
| ||Thread Tools||Search this Thread|
|02-18-2018, 03:19 PM||#1 (permalink)|
Join Date: Jul 2006
FS Splash Minimag - SOLD
This was part of a package I rescued from someone's garage. Based on the condition of the orings and the amount of dirt/grime, it had been sitting for some time. I cleaned it up and replaced all of the orings and the regulator seat. I forgot to order orings for the expansion chamber but I did put in some buna's I had laying around that fit and seal fine. I would suggest replacing them with urethane in the near future, especially if you plan to use Co2.
This gun has been used. There are some dings/scratches in the splash ano but they are mostly hard to see due to the splash ano colors. I'll add some pics of marks on stock later which is mostly wear/scratches on butt area. Some brownish/dark spots on the body with most on the feedneck. Scrapes on front drivers side rail and vasa. Ding/scrape on top rear corners of sight rail. Stock thumb screw, sight rail screw, asa screws, and rear stock screw have rust/corrosion.
Valve is matching. Level 7. I put a few balls through it in my back yard and it shoots well.
If you would like some additional pics, send me a PM.
I am also posting a Pre-2k sniper, miscellaneous parts, and soft goods in other threads. No additional shipping for anything else that I can fit in the box.
Additional photos can be found here: https://ibb.co/album/jXCBYv
Last edited by Smoothpumper; 02-26-2018 at 12:25 AM. Reason: Sold
|02-25-2018, 09:20 PM||#4 (permalink)|
Join Date: Jun 2007
Location: Charleston, SC
Who picked this one up? Interested in some of the splash pieces for my mag.
Sent from my iPhone using Tapatalk
I buy Automags and Parts: if you need cash shoot me a pm
My shop page: Bearded Works
|Thread Tools||Search this Thread|