Fall sale- CCM, palmer's, and AKA stuff
Recouping some losses and unloading some stuff I scored from an acquaintance locally.
Insurance is the buyer's responsibility to ask for, I provide a USPS DC# as a courtesy out of my own pocket.
trades of interest:
K-series length palmer's quick release bolt for a KP-2
2K cocker valve
Revvy with X-board-$30 OBO + shipping: I have no idea how to tell the diff btwn a 12v and an 18v revvy, this one takes 2 9v batteries. fantastic shape, comes with extra lid
AKA Marker Bag-SOLD: Great condition, appears almost unused. Zipper and Velcro work like new, inside is clean as a whistle, AKA logo is pristine. Only flaw is a little bit of white (probably paint) residue on the lower right hand side below the logo.
NOTE: The dark spot surrounding the white spots in the photo is water I used to see if I could get the residue off, not a stain.
Barrels (all cocker threads):
AKA javelin large bore x2-$30 OBO ea + shipping: Pristine condition, 12in 1 Pending, 1 available
J&J barrel- $20 OBO + Shipping: Pristine condition, 12in
Palmer's unported brass barrel- sold: was told it was a Palmer's by previous owner, great condition inside and out. The spirals seen in the photo are because the previous owner had wrapped it in electrical tape. Will buff out with a good polish job.
misc stuff (only those listed are currently for sale!!!)
Understood gat wrap-SOLD + shipping: Understood label was cut off because it was douchey :p
SM 2K pump kit-sold: comes with two pump rods, the longer is for full block and might be a bit bent but functions just fine, the shorter may be for p-blocks.
Belsales EVO valve-$30 OBO + shipping: Came to me NIB, installed once, never played with.
CCM 2K deluxe mounting rods-sold: some flaking chrome on main guide rod and under area where pump rod would cover, can get more pics on request.
2K gloss black front block-$10 OBO + shipping or free with something else: what you see is what you get.
Palmer's quick release bolt with short pump rod and mounting piece-$40 OBO + shipping: Got this for a project, it appears to be p-series length (?, its 4.5in in length front to back). ias it sets you would need a quickstrip slot to install, but getting out the lug (which in true plamer's fashion is just a cut screw) would be easy with the assistance of a bench vise, after which you could install an SS allen screw for a lug. Mounting collar unscrews from pump rod easily.
Palmer's Fatty Stab-sold: LNIB, never used on the field
PM sent for Palmer fatty - check inbox
PM on the way
ill take the javelin on the bottom. send me your paypal info!
|All times are GMT -4. The time now is 10:20 AM.|
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC