I bought this some time ago, but never got around to finishing. This should go to someone with some milling/soldering skills. the FBM frame is rough milled to accept e2 board, but still needs to be mounted, and microswitch needs to be fixed so the trigger can activate it. Theres also a few spots that would need to be polished out and cleaned up. The body has, from what i was told, a factory defect on the back near the sled ( check pics). It was drilled for eyes and then plugged, i polished out the plugs and they are quite difficult to see from the outside, and the bolt slides on the inside no problem. The MQ2 i purchased and was told it was brand new. AKA feedneck is missing the screw to tighten. I will also include some gray dye stickies, and i can include the E2 board shown that has the microswitch soldered in place of the optic switch, however the microswitch that is on it is broken ( i have another i can include). As i said before, this should go to someone who is comfortable in taking on a project like this.
Price: 700 shipped OBO. I really hate it let it go, but i know ill likely never finish it :/
Pics to follow..
Quick mock up of it assembled, only the parts mentioned above are included.