|Old Gun Tech Specific how-to's on fixing and tuning in those old guns|
| ||Thread Tools||Search this Thread|
|01-24-2010, 03:30 PM||#1 (permalink)|
Nightmare LB Parts
Okay so here's my Dilemma, I have a Nightmare LB pump action paintball gun, but i have lost the CO2 cap off the back. (I'm still beating myself up about it too) anyways, i was wondering if anyone could tell me if i can some how acquire a new one or is there a conversion kit that u can buy or make to feed the CO2 from regular tank to the guns ASA valve?
|01-27-2010, 04:41 PM||#2 (permalink)|
Inch of Gold
There are constant air adapters, but they are pretty rare. Try PM'ing bacci or finding "sugarstump" on ebay and sending him a message. They have pretty big vaults of old school parts. Another option is just to use a dummy 12 gram and run it to a tank, but then you need to figure out how to mount the tank. Small tanks in/under Crosman stocks seem to be a popular choice.
You could also just make a plug out of aluminum and thread it, if you can figure out the right sized die to use.
|04-18-2019, 02:49 PM||#3 (permalink)|
Join Date: Jul 2009
Location: Aloha, Oregon
I know this is an old one but I have the same problem and am wondering if anyone knows off hand what threads the CO2 plug are and also the front plug of the upper tube. Thanks. (Nightmare LB)
|04-19-2019, 06:11 PM||#4 (permalink)|
Paintball is my Obsession
Join Date: May 2011
Location: Pittsburgh, PA
There’s a funny looking fella that has done the leg work for your question.
Here is his thread about the co2 and feed tube plugs.
|Thread Tools||Search this Thread|