mcarterbrown.com

mcarterbrown.com (https://www.mcarterbrown.com/forums/)
-   Old Gun Tech (https://www.mcarterbrown.com/forums/old-gun-tech/)
-   -   Nightmare LB Parts (https://www.mcarterbrown.com/forums/old-gun-tech/106102-nightmare-lb-parts.html)

Kermit 01-24-2010 02:30 PM

Nightmare LB Parts
 
Okay so here's my Dilemma, I have a Nightmare LB pump action paintball gun, but i have lost the CO2 cap off the back. (I'm still beating myself up about it too) anyways, i was wondering if anyone could tell me if i can some how acquire a new one or is there a conversion kit that u can buy or make to feed the CO2 from regular tank to the guns ASA valve?

Thank you,

Kermit

Mayvik 01-27-2010 03:41 PM

There are constant air adapters, but they are pretty rare. Try PM'ing bacci or finding "sugarstump" on ebay and sending him a message. They have pretty big vaults of old school parts. Another option is just to use a dummy 12 gram and run it to a tank, but then you need to figure out how to mount the tank. Small tanks in/under Crosman stocks seem to be a popular choice.

You could also just make a plug out of aluminum and thread it, if you can figure out the right sized die to use.

DropDeadFred 04-18-2019 01:49 PM

I know this is an old one but I have the same problem and am wondering if anyone knows off hand what threads the CO2 plug are and also the front plug of the upper tube. Thanks. (Nightmare LB)

pghp8ntballer 04-19-2019 05:11 PM

There’s a funny looking fella that has done the leg work for your question.
Here is his thread about the co2 and feed tube plugs.


All times are GMT -4. The time now is 03:51 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC