mcarterbrown.com

mcarterbrown.com (https://www.mcarterbrown.com/forums/)
-   Ask The Experts (https://www.mcarterbrown.com/forums/ask-experts/)
-   -   Shocker NXT parts (https://www.mcarterbrown.com/forums/ask-experts/135911-shocker-nxt-parts.html)

arkangel 09-30-2010 07:06 PM

Shocker NXT parts
 
Just got a shocker nxt and was wondering what are some parts i should upgrade or good parts to upgrade it with? because im going to deck it out and wanted to make sure i didn't miss anything.

AlexH 10-01-2010 01:55 AM

is the gun bone stock?have you even used it yet? id play with it before you decide to dump money into it.

PistolRogue 10-01-2010 02:13 AM

General rule of thumb for figuring out what to mod on a gun is to play with it a few times first to see what you feel is lacking. I know a really good mod for those is doing the sprung-bolt mod which, with proper tuning can get you really good efficiency as well as reduced first-shot dropoff. Pretty sure anything else will be mostly ergonomic in nature, and therefore, highly dependent on your individual preferences.

arkangel 10-01-2010 04:57 PM

as for right now i havent used it yet. just trying to get a list of parts/accessories i can grab for this beauty.

shadawg 10-03-2010 03:28 AM

Q-lok. roller bearing trigger.
they come stock with the he bolt/ he manifold and break beam eyes.
You could throw a virtue oled in it to get your dwell programming really dialed in vs. the stock board but other than that. you don't really need to do much, they are pretty solid out of the box.

TomCross 10-03-2010 05:10 AM

Get a freak set!

Now that I have your address I'll ship it Monday - get it there by Friday so you can play with it this weekend!

I've never had an issue with first shot drop off or any inconsistancy. I just set the board to the program I need (PSP, NXL, Unlimited ROF) and the default settings are right on. I always used a high pressure screw in tank.

It comes stock with a q-lok. you'll love it.

SuxXarD 10-03-2010 09:52 AM

Barrel is a must for any gun.
Depending on how you like the trigger, that's an option.

When I had my Octane NXT, the stock trigger was awesome (I'm a fan of swoop triggers, as opposed to blades/etc).

It had the tool-less end cap too, so that was nice.
HE bolt, but they come stock with them.
I only had a Nerve board in mine, so I didn't have all the fancy options like Tadao, or Virtue would have.

Other than that, I'd suggest a new reg as well.
Palmers, AKA, BL, something along those lines.

arkangel 10-06-2010 06:16 PM

i already have 2 1/2 freak sets haha so im all good on barrels. but good thing that itll come with a q-lock just one less thing to buy lol.

SuxXarD 10-07-2010 08:49 PM

Tool-less bolt guide.
BEST investment on a shocker.


All times are GMT -4. The time now is 11:44 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC