-   CCM (
-   -   New to CCM world tell me what u think! (

armygermz 10-21-2010 02:52 PM

New to CCM world tell me what u think!
Ok i just bought a CCM SS25 with no barrel for a very VERY good price of $40.00 from a mom who grounded her kid and sold his gun. Not scratches on the gun except from auto trigger rub. Inside was kinda scary/confusing/dirty. S0o0o0 when i hooked up air to her she leaked down the barrel/bolt. I cocked it and still leaked so i watched vids at Pumpenstein: 2006 NSA National Champions very good and helpful but still no fixing of issues. So i know its a shot in the dark but if there is any of you CCM kings and queens who are located in hawaii and would like to teach show and w/e id really REALLY!!!!! be grateful. Also any ideas for up grades for internals or externals would be sweet. I also would love to find/buy a hitman plate.

Droop 10-21-2010 02:53 PM

i hate you... 40 bucks is incredious
dont change anything, put a nice small bore barrel on it, and play with it.
as for the barrel leak. mess with the pressure the reg is outputting. could just not be sealing.

armygermz 10-21-2010 02:59 PM

i tried to and it didn't help. :( i went to make a Pressure tester and failed because i couldnt find a down stream bleed valve

Deuce 10-21-2010 03:00 PM

They're like the most Autocockers, there are lots of videos out there to help out with maintenance. That was a ridiculous deal of a buy. Enjoy it!

armygermz 10-21-2010 03:06 PM

5 Attachment(s)
Here is the CCM and the last pics are my other toys :)

desertT1 10-21-2010 03:08 PM

Amazing deal on that one. Have fun with it.

armygermz 10-21-2010 03:09 PM

Yea i defiantly will enjoy her its my first CCM and the sad this is iv never played with a Autococker. My team captain/sponsor/field and store owner lol told me they were the devil haha and growing up in the paintball world all i shot in the woods was a Tippman prolite and 98s and then eventually A5....then when we started speedball all i had was the impulse. and eventully the SFT shockers which i have like 5 and love them...

desertT1 10-21-2010 03:11 PM

As far as the leak, cock it before you air it up. If you do it after, the seal might not form. Turn off air, shoot to clear, cock, air up.

armygermz 10-21-2010 03:12 PM

:( i tried no bueno

desertT1 10-21-2010 03:15 PM

Hmmm, if it's dirty it might also not have been lubed either. What I do is take the marco out of the fitting on the HPR and shove some lube in there. Put the line back on and shoot the gun a bunch (20-30 shots, or just let it happen as I play) and that will typically take care of it.

All times are GMT -4. The time now is 07:55 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC