-   Dealers Forum (
-   -   ECAP's Loudeners, Door Breakers, and Muzzle Breaks..Now in stock ready to ship parts! (

ECAPNation 11-02-2010 02:43 AM

ECAP's Loudeners, Door Breakers, and Muzzle Breaks..Now in stock ready to ship parts!
These are made from black delrin with other material options being available as well.


- 1 left in stock 7/8'ths barrel mount DT Tacticalouds $35.50 (Shipped US) $42.50 (Shipped International)



They are pretty much a clone of the old AA intimidator with two major changes, they are made to order so they are made to fit your barrel as well can be customized to fit any type of gun, or have the outside machined to your liking. The second change is they are made from delrin stock.... I like delrin because its light and doesnt need to be anno'ed..... but I can make them out of what ever really.

This is the stock pattern one, if you do not specify that is what it will look like.

- $20, any OD barrel 1, 7/8, 13/16 or other. Just specify.
- Custom OD work will be quoted on a case by case basis

Custom ones.

Another TacticaLoud - $30 Any barrel diameter

Door Breaker tipped, mini loudener cust specifically to fit a DSG.

My personal loudener...Im calling it the DT-TacticaLoud It sits about 2 inches farther back on the barrel to cover up unsightly muzzle breaks for the AT series or other guns..... DT for deep throat!

Another Micro Brass Loudener

Aluminum Loudener

Cut to fit a 007 slip fit barrel space, OD milled to look like a tactical silencer

Micro Loudener in brass, tiny size BIG SOUND

Another Micro Loudener in brass... this one cut to fit a palmer squall

Micro Loudener cut to fit non slip fit 007 barrel (can not use a pump)

Micro Loudener in delrin cut to fit on a blazer.

Pico Loudener in derlin... Cut to fit on my airsoft sniper.

Door Breakers

My term for thinner smaller loudeners that have a scalloped tip much like tactical shotguns. They have a muzzle break meant for blowing door locks out. While not nearly as loud as the ECAP loudener they do amplify sound just a little bit and they look awsome on tatical-ish guns.

Stock Doorbreaker.

- $20, any barrel ID needed
- Custom ones will be quoted on a case by case basis

Custom ones

Nelspot slip fit Doorbreaker

Micro DB, this is on my personal DSG

Integrated barrel DB on a custom gun... more on that in a week or two

Brass Mini-Door Breaker.. In between Micros/full size.

Muzzle Breaks

Purely custom.... Ive made several kind all with different end results.

- Please PM or EMail ( for a quote.

Some we have made.

Brass MB With oval slots

Square MB With slots, porting, and a integrated iron sight

Brass MB With 6 holes (as seen on The Imperial)

Off-Center muzzle break.... This one can be bought for $15 shipped.. its a blemish one.

Barret Style muzzle brake... These would run $40

Very custom muzzle break with an oring claming retention system...for a carbon fiber barrel that cant be used with a set screw

More hotness!! This is going on a one off AXE.

Another custom muzzle break with an oring retention system.

Ducklebuster Reborn... blank guide rod muzzle break with a custom sight rail.

Ive got a few more I have to upload yet

dundadun 11-02-2010 03:06 AM

ooh I love the idea of the integrated site

chopper duke 11-02-2010 09:41 AM

Hey BOS, I'll be hitting you up in a little bit for a loudener or two.

ECAPNation 11-02-2010 12:29 PM


Originally Posted by dundadun (Post 1531711)
ooh I love the idea of the integrated site

Ditto thats why I made it for my DRV, but it ended up looking goofy on the stubby barrel I put on it.

Rockfrog 11-02-2010 01:52 PM

ship to Canada?
cut/extend this to fit a 007 slip fit barrel space?


ECAPNation 11-02-2010 02:06 PM


Originally Posted by Rockfrog (Post 1532167)
ship to Canada?
cut/extend this to fit a 007 slip fit barrel space?


You want one that thin?

That is 1.25 delrin stock..

Figure that cut for a nelson would be around $40 to canada

Rockfrog 11-02-2010 02:15 PM

My 007 didn't come with the stock extension cover, I'm looking for something to replace it (and add a bit of muzzle protection). But, I also don't want a big giant monstrous blob on the end of the barrel, though (just don't think the look would suit this marker). I'm trying to remain a bit more subtle as it were. I think this type would look good, but if you think it'd be too thin maybe a bit bigger/wider? Or possibly in brass (and I can blacken it)?

ECAPNation 11-02-2010 02:41 PM

Not to kill a sale of a loudener..

I do have extension barrels and might have a standard nelspot sleeve as well.

Rockfrog 11-02-2010 03:12 PM


ECAPNation 11-24-2010 02:36 AM

Black friday pricing is in effect!

All times are GMT -4. The time now is 05:52 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC