mcarterbrown.com

mcarterbrown.com (https://www.mcarterbrown.com/forums/)
-   Smart Parts / GOG (https://www.mcarterbrown.com/forums/smart-parts-gog/)
-   -   eNMEy Reg Vs. Other Regs (https://www.mcarterbrown.com/forums/smart-parts-gog/242959-enmey-reg-vs-other-regs.html)

B3ARC1AW 10-01-2013 09:20 PM

eNMEy Reg Vs. Other Regs
 
Specifically, a Black Magic reg. I have nothing against the eNMEy regulator, I just prefer the macro fitting placement on my Black Magic reg since it is up higher on the regulator and I can use a straight fitting down at a 45 degree angle. It just feels more comfortable to me and the macroline is positioned better to fit into my on/off.

I've read the eNMEy regs, and other GoG regs, are the same internally as a Luxe reg. Is this true? Wouldn't the air routing and function be different because the Luxe has no macroline and the eNMEy does?

So, will I have any benefit of using one reg over the other, or will they perform about the same?

As a side note, I only use air so CO2 is not a factor in the decision. And my eNMEy reg isn't very broken in yet so that's why I question if when it does break in if it will be as consistent as other regs.

PistolRogue 10-02-2013 09:37 AM

Same internals as the Luxe regulator, the packaging and housing are the only differences.

If the macro fitting position really bothers you that much, knock yourself out, just don't expect any significant improvement in performance.

B3ARC1AW 10-02-2013 10:14 AM

OK, thanks for confirming what I had read.

And I wasn't expecting one to be better than the other, so it's not a big deal to me.

super_stanchy 10-02-2013 10:29 AM

the gog reg maxes out before the 3way/noid thing overpressurizes.

mine is also crazy consistent.... so im leavin it!


All times are GMT -4. The time now is 10:16 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC