S6.5 with weird trigger
i bought a s6.5 and have been having a couple problems with getting the trigger adjusted. Just wondering if anyone can help me with the issues I am having. Most times it fires just fine, if I am testing it at home it seems to work great. When I get to the field, sometimes the trigger will not fire the marker unless I squeeze the ever living daylights out of it. Even when it is doing that, I can still AT just fine, but single firing is just horrid. It usually goes away after 10-20 shots and I can't find a solution for it. I have adjusted the undertravel screw to the exact position it says, and I have it timed pretty good. Anything else that I am forgetting?
Adjust the sear lug in a little bit, you may have it to far out which make the release farther in the trigger pull. You generally want the gun to fire while ATing when the back block is about 1/8" from the body.
here is all the instructions to solve any issues with CCM gun.
I recently had the same problem with my 6.5. Sometimes I had to pull so hard that my finger almost hurt from pulling the trigger.
After Disassembly of the frame and removal of the trigger, I found the sides of the trigger, inside the frame to be "slightly gummed up" with old paint residue. A little solvent and a toothbrush helped to some extent, then a light wet-sanding with 1500 grit sand paper made it good as new. Smooth Trigger Pull and auto triggers like a dream.
I gleaned the info above from watching some of the videos mentioned above by CCMachinist. TF does a Fine Job of explaining almost anything about a CCM Marker.
Now I am just waiting for CCM to get my new Aluminum Trigger to Anno, to be made into a beautiful Dust Red.
|All times are GMT -4. The time now is 09:28 AM.|
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC