mcarterbrown.com

mcarterbrown.com (https://www.mcarterbrown.com/forums/)
-   WTB (https://www.mcarterbrown.com/forums/wtb/)
-   -   I need wgp reg seals or seats (https://www.mcarterbrown.com/forums/wtb/303470-i-need-wgp-reg-seals-seats.html)

NYKNIGHT01 08-27-2017 07:55 PM

I need wgp reg seals or seats
 
Been all over. I need to find the small round flat seal or seat for wgp regs.. particularly the ones that go in the stock...ergo...black magic..etc...no 006 rings don't work...so if anyone can know where to source or if ya got em...let me know! Thanks!

minimag03 08-27-2017 08:50 PM

Empire used the WGP HPR on the Sniper and Resurrection. So their parts are interchangeable. Inception Design's regulator might also work.

Here is the seat on PBG's site....
WGP Regulator Pressure Adjustment Piston Seat (Urethane)

The entire piston on their eBay store....
WGP Regulator Pressure Adjustment Piston with Seat Black Magic Ergo Karnivor

NYKNIGHT01 08-27-2017 10:36 PM

Awesome! I saw that too but for some reason the one I pulled from my ergo looks thinner than the one on pbg...maybe I'll give them a call to verfiy! Tyty

Cunha 08-27-2017 11:31 PM

To confirm - externally adjustable WGP high pressure regs like the original ergo are compatible with empire sniper current guts?

punkncat 08-28-2017 08:28 AM

I would have to look back through some posts....I found some of these at two retailers. Both new and bagged, one was NOS and fell apart the moment I used them. The other, I think I ordered from ANS, were perfect.

minimag03 08-28-2017 09:36 AM

Quote:

Originally Posted by Cunha (Post 3411464)
To confirm - externally adjustable WGP high pressure regs like the original ergo are compatible with empire sniper current guts?

Yes, WGP regs are the exact same regulator that Simon used on the Sniper/Ressurrection. He also used the design for his Inception regulator. But the description for his regulator says the reg seat has been improved to me more durable. So he might have changed something on the Inception regulator that might not be compatible. However, it would be worth looking into in the case that they are a direct replacement. Since it's such a critical seal, I'd take advantage of the best options out there.

NYKNIGHT01 08-28-2017 01:01 PM

yea I looked that up it seems the resi reg uses rings.. when I get home I may look at mine.
I tried an 008 but in a buna and a urethane...and they both creeped a bit..
anyone ever swap out the flat reg seal with an oring with success?

minimag03 08-28-2017 10:34 PM

Quote:

Originally Posted by NYKNIGHT01 (Post 3411610)
yea I looked that up it seems the resi reg uses rings.. when I get home I may look at mine.
I tried an 008 but in a buna and a urethane...and they both creeped a bit..
anyone ever swap out the flat reg seal with an oring with success?

Yeah, AKA did in their SST regulator. But it would be impossible in this regulator without a custom piston to hold the oring.

You're going to need a reg seat, trust me man lol.

NYKNIGHT01 08-29-2017 08:13 AM

Oh I know I do! Waiting for pbg to confirm size !

sale2me 08-29-2017 09:49 AM

humm... let me get some pix up tonight, I have a bin of new and used WGP reg parts.


All times are GMT -4. The time now is 02:33 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC