mcarterbrown.com

mcarterbrown.com (https://www.mcarterbrown.com/forums/)
-   CCI (https://www.mcarterbrown.com/forums/cci/)
-   -   R. Cansler FSR Phantom Kits Who Owns One (https://www.mcarterbrown.com/forums/cci/306010-r-cansler-fsr-phantom-kits-who-owns-one.html)

TCPaintball 11-24-2017 12:36 PM

R. Cansler FSR Phantom Kits Who Owns One
 
So i was in conversation on FB about my FSR Phantom and Rob came on and i asked:

Andrew Askandar Robert just to put this to rest how many of these kits where made? I thought it was 40 then I heard only 10

Robert Cansler III 5 of the black ones, 2 cocker breaches, the one Mathyou Cota owns, and the one i own. Theres one more prototype version with a gas thru grip conversion but that one is not complete yet


So since i have one of the Black ones or what used to be black lol who on here has the others? if they are on here.

https://uploads.tapatalk-cdn.com/201...843dafeeb2.jpg

dirtylittlemo 11-24-2017 01:11 PM

I own two of them

TCPaintball 11-24-2017 01:15 PM

Quote:

Originally Posted by dirtylittlemo (Post 3435168)
I own two of them



Please share pictures would love to see them!


Sent from my iPhone using Tapatalk Pro

casper 11-24-2017 11:36 PM

I have a few videos of mine up on YouTube I'll post later!

TCPaintball 11-24-2017 11:38 PM

R. Cansler FSR Phantom Kits Who Owns One
 
Iím Curious if I had another bolt set up for reg paint couldnít I just switch them out and swap the barrel and use the body as a SC center feed?


Sent from my iPhone using Tapatalk Pro

pearcem 11-25-2017 08:50 AM

I have half a kit. I bought one of the slightly blemished barrels that he sold after the fact, and he threw in one of the bolt handles. Cut down a breach myself with a dreamel.

casper 11-25-2017 07:52 PM

https://youtu.be/CZ4WQYhNAqA
Here's a link there's a few I did just look around . I have another one (fsr phantom)in my hands now ! Robert and I go back and forth on why this beauty shoots so good ! We think it's that burst of high pressure air (750 psi). The way the rnd sits in the breach . Of course that lapco barrel although a 683 was designed around the fsr rnd . Being a tight fit lets the rnd engage the rifling giving a stablizing spin with that length. Hammerhead barrels work but your rnd is wobbling down the barrel. It's my opinion that muzzle breaks effect the air around the fsr as it exits the barrel . This gun with the cci reg set up at 750 psi will give great consistant stabilized shots off 12 grams on a 13/3000 around 150 shots at least . I was getting chest shots constantly at 90 yds with a red dot no bipod . I'm pairing it with my SSR's supremacy scope ! Never thought I'd see a 350 scope on a phantom other than the creators gun which I tried to pry from his hands lol! Only drawback is rate of fire ! It's an idiot proof shooter built on the simple yet proven Nelson system . Like most players who do home projects time and money are an issue when it comes to truly mass producing something . Robert may someday produce more or even a kit ,till then we have a few !

TCPaintball 11-25-2017 07:56 PM

Oh Casper Iíve watched that video of your I canít even count how many times lol. Itís one on the first videos Iíve seen on the FSR phantom and I was watching it even before i finally got my own!!

Thanks for sharing these on YouTube and here. Canít wait to test my setup out.


Sent from my iPhone using Tapatalk Pro

bowcycle 11-27-2017 02:30 PM

Mine is the gas-thru grip conversion he's working on now.
It's also a lefty!

TCPaintball 11-27-2017 02:33 PM

Quote:

Originally Posted by bowcycle (Post 3436004)
Mine is the gas-thru grip conversion he's working on now.
It's also a lefty!



Pictures please would love to see that


Sent from my iPhone using Tapatalk Pro


All times are GMT -4. The time now is 05:10 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC