Anti-rollout fingers/detents - AC,VM68,CCI,Shocker,Trracer,Spyder
Something I've been meaning to make up for a long time -
Love old-school large-bore barrels but can't stand the rollouts? Bore-sizing inserts too much investment?
Get your closed-bolt fix with anti-rollout fingers! The fingers are TPU, flexible and insanely durable and reinforced with PETG - stands up to the most vigorous of swabbing! Drop into the marker and screw on your favorite old-school barrel; securely centers each ball in the bore, no more roll-outs with tiny modern paint!
* Not recommended to use with certain breach-drop markers (ie: WGP Ranger, beveled Carters) with no internal shoulder to pinch the insert against the barrel.
*VM68 detent comes with spacer rings in the event your original brass ones were lost.
*PMI Trracer/ACI Maverick fingers come with an additional spacer - this piece screws onto the barrel first (it's purposefully a tight fit, I recommend gloves)
Autococker/AC - $1.50ea
VM68 (w/spacers) - $2.00ea
PMI Trracer/ACI Maverick (w/spacer) - $2.00ea
CCI - $1.50ea
Shoebox Shocker - $1.50ea
Spyder - $1.50ea
OG Sterling thread - $1.50ea
Add $3usd shipping/handling per order. 2-piece minimum order.
Standard lettermail, will ship out twice a week. Transit time is averaging 10 business days from Canada to USA. Expect longer delivery around the holidays, please.
Paypal: freedummy at gmail dot com
PPS Blazer (feasibility pending further measurements)
CCI Revolution (feasibility pending further measurements)
Shoebox Shocker Sport
Have a phantom you could try these out on?
I'll take 10. pmed
I do - the barrel/body shoulder these interface with is very narrow on a Phantom, not much surface to pinch. They're also smaller outer diameter. I'll give it a try, but Trracers (why I started experimenting with this) are the same issue
I’ll take 4, pm me PayPal address?
is this your own design. or something off thingiverse and trying to make a buck out of it?
These are my own files, my own prints, my own solutions to problems I speculated about back when PPS first made their metal version. You can read all about it in the PPS thread where we originally considered making these from TPU. https://www.mcarterbrown.com/forums/...ml#post3343135
Edit: Here's the free version for anyone else who wants to make these themselves. Its different than mine - I opted to go TPU with a PETG reinforced ring to keep it thinner and stable when tightening the barrel. Anyone who wants a refund is welcome to it, I'm not trying to swindle anyone, just keep a side-hobby going so I can make bigger things.
Sorry, didn’t notice it and didn’t register mentally at all being written and spaced out format for some reason. #MyBad
|All times are GMT -4. The time now is 09:14 PM.|
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC