mcarterbrown.com

mcarterbrown.com (https://www.mcarterbrown.com/forums/)
-   Misc Paintball Items (https://www.mcarterbrown.com/forums/misc-paintball-items/)
-   -   Stiffi Barrels Parted Carbon Fiber Shafts! (https://www.mcarterbrown.com/forums/misc-paintball-items/314341-stiffi-barrels-parted-carbon-fiber-shafts.html)

shaunyoung000 09-07-2018 04:29 PM

Stiffi Barrels Parted Carbon Fiber Shafts!
 
So I bought a lot of stiffi barrels, complete and incomplete and will be parting the set now. Some old, some new, some sanded and finished, some not. It’ll take me a bit to go through all, so check back for updates. I’ll start with the carbon fiber shafts and then move onto the barrels/kits

All shafts and barrels increase the bore to the end, so a 693 starts at breach end at 693 and ends near 700.

Slight discount if you buy more than 1 (combined shipping). I could be a bit off on measurements, but will confirm before I send any out.

Below are the carbon fiber shaft only for use on projects or build your own barrel. I can cut custom lengths for your feed tube projects.

681 - $10 shipped each
14’ old style muzzle with holes sanded for mounting- sold


683 - $10 shipped each
14’ old style muzzle with holes- sold
14’ old style muzzle no holes- sold
14’ shaft- sold
14’ shaft- sold
14’ shaft- sold
14’ shaft- sold
14’ shaft- sold

685 - $12 shipped each
10’ old style muzzle with holes- sold
10’ old style muzzle with holes
14’ new style muzzle with holes

687 - $15 shipped each
9.5’ old style muzzle with holes
10’ old style muzzle with holes
10’ old style muzzle with holes
10’ old style muzzle with holes
12.5’ old style muzzle with holes- sold
16’ old style muzzle with holes sanded for mounting
16’ old style muzzle with holes sanded for mounting
14’ shaft
16’ shaft (raw unsanded on outside)

689 - $20 shipped each
10’ just holes
10’ old style muzzle with holes
14’ old style muzzle with holes
14’ old style muzzle no holes
16’ old style muzzle no holes
14’ shaft
14’ shaft
14’ shaft

691 - $25 shipped each
9.5’ old style muzzle with holes
10’ old style muzzle with holes
14’ shaft
16’ shaft
16’ shaft (raw unsanded on outside)
16’ shaft (raw unsanded on outside)

693 - $25 shipped each
14’ shaft

695 - $25 shipped each
16’ old style muzzle with holes

700 - $25 shipped each
6.5 old style muzzle with holes- sold
16’ shaft (raw unsanded on outside)- sold

Here's the threaded barrels:

Freak Front - $30 shipped each
16' new style muzzle, blemishes on anno-sold
16' prototype muzzle very good condition-sold
16' new style muzzle, very little blemish on tip -sold

Ion
11' 689 new style muzzle, blemishes on anno -$20
12' 689 new style muzzle, blemishes on anno -$20

A/C - $30 shipped each
9' 689 ported -sold
12' 689 new style muzzle, great shape -sold
14' 691 new style muzzle, blemish near tip, very good shape otherwise -sold
14' 693 new style muzzle, very good shape -sold
16' 685 old style muzzle, very good shape -sold
16' 691 new style muzzle, discolored spot on fiber-sold
16' 695 new style muzzle, very good shape -sold
and
14' 689 hairline crack on old style muzzle (doesn't affect performance) -sold
14' 691 new style muzzle, blemished anno and near muzzle -sold

98
13.5' 689 new style muzzle, blemishes on anno - $20
15' 689 new style muzzle, blemishes on anno -$20
16' 689 new style muzzle, pristine - $25

Angel (Old style)
14' 691 old style muzzle, hard fall tip wear -$15
14' 689 switch, stuck chewed up back, pristine bore, tip wear - $15

Stiffi Switch (A5/prolite threaded) - $20 each
12.5 no switch tip
14' tip wear -sold
14' tip wear -sold
14' little tip wear-sold
16' tip wear-sold

https://imgur.com/b9hmkLD.jpg
https://i.imgur.com/6gwyNxk.jpg
https://i.imgur.com/G4pchQa.jpg
https://i.imgur.com/jzi1evJ.jpg
https://i.imgur.com/te1Tuj8.jpg
https://i.imgur.com/K97VVF8.jpg

shaunyoung000 09-07-2018 04:30 PM

bump

spymongoose 09-07-2018 08:18 PM

Pm’ed about the 681 and one 683

shaunyoung000 09-08-2018 02:07 PM

Quote:

Originally Posted by spymongoose (Post 3516770)
Pm’ed about the 681 and one 683

thx, updated with ones sold and added the threaded ones. Will be fixing the rest and uploading some more.

shaunyoung000 09-15-2018 03:19 PM

TTT

shaunyoung000 09-21-2018 11:20 AM

Bump

shaunyoung000 09-26-2018 10:30 PM

bump

shaunyoung000 10-01-2018 10:15 PM

bump

shaunyoung000 10-08-2018 11:21 AM

bump

shaunyoung000 10-15-2018 02:48 PM

Bump


All times are GMT -4. The time now is 10:11 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC