mcarterbrown.com

mcarterbrown.com (https://www.mcarterbrown.com/forums/)
-   WDP (https://www.mcarterbrown.com/forums/wdp/)
-   -   Angel A4 orings (https://www.mcarterbrown.com/forums/wdp/320381-angel-a4-orings.html)

The_Hyren 04-17-2019 10:43 PM

Angel A4 orings
 
Any one know the dimensions of the spool assembly orings? I have a leak out my exhaust port from the return air spring.

The_Hyren 06-13-2019 05:07 PM

Can confirm these spool orings suck. They are a very odd triple stacked design. Basically a 2, 3, and 4 mm inner diameter and .5mm cross section fused together. I bought all 3 sizes, the 3mmx.5mm being really hard to find. Sadly it seems that they are slightly to large all stacked together so the noid shaft has too much drag to work right. I need to find some slightly smaller ID sizes to try.


All times are GMT -4. The time now is 07:57 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC