mcarterbrown.com

mcarterbrown.com (https://www.mcarterbrown.com/forums/)
-   Ask The Experts (https://www.mcarterbrown.com/forums/ask-experts/)
-   -   Identify This Stainless Steel Autococker Bolt and Aluminum Beavertail (https://www.mcarterbrown.com/forums/ask-experts/322688-identify-stainless-steel-autococker-bolt-aluminum-beavertail.html)

pballgod 07-12-2019 07:39 PM

Identify This Stainless Steel Autococker Bolt and Aluminum Beavertail
 
I've played with autocockers forever. Never saw a stainless steel bolt before. Anyone have an idea who made it? Any help would be appreciated. Any maybe some help on this beavertail?

https://www.dropbox.com/s/cthnc7l8gp...bolt.jpg?raw=1

https://www.dropbox.com/s/6avby5rznn...tail.jpg?raw=1

Macdave06 07-12-2019 08:44 PM

I believe that bolt is made by pro team. Not sure on the beavertail.

pballgod 07-12-2019 09:36 PM

Yup you got the first one. I should have gone to Bacci to look it up! Thanks! Anyone on the Beavertail?

Macdave06 07-12-2019 10:44 PM

Bacci is a great source for old stuff.

DocsMachine 07-13-2019 12:14 AM

You sure it's stainless steel? It'd be very heavy if that's the case.

If it's not aluminum, it could conceivably be titanium. But I'm pretty sure even Pro-Team wasn't using actual stainless steel for their bolts back then.

Doc.

pballgod 07-13-2019 09:56 AM

Its too heavy for aluminum or titanium. It matches a bolt on Bacci's web site say its stainless steel and its made by pro team. It weighs 3.8 ounces!

Meleager7 07-13-2019 02:38 PM

Quote:

Originally Posted by pballgod (Post 3598934)
I've played with autocockers forever. Never saw a stainless steel bolt before. Anyone have an idea who made it? Any help would be appreciated. Any maybe some help on this beavertail?

https://www.dropbox.com/s/cthnc7l8gp...bolt.jpg?raw=1

https://www.dropbox.com/s/6avby5rznn...tail.jpg?raw=1

Whatever material it is, you put that in the back of your mind. Stay focused, that is a cool bolt , and you needed to build a cocker around that yesterday!

pballgod 07-13-2019 03:21 PM

I hope someone will. I find old stuff and bring it back to market. The beavertail is killing me though. Ive seen them around but no one seems to know who made them.

Macdave06 07-13-2019 04:26 PM

1 Attachment(s)
The spyder I just sold had a very similar beavertail, but I wasn't able to ID it either. From the pic it looks like someone may have squared off the top of yours. Mine was rounded at the top.Attachment 71050

pballgod 07-13-2019 04:35 PM

mine is much thinner than this one.


All times are GMT -4. The time now is 03:49 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC