The Second DSG Sales Thread
ALL SOLD OUT !!!
Here it is, the sales thread for the second run of DSGs.
Here is what you will be ordering:
(I'll snap some production photo's at the shop tommorrow)
See the original sales thread for user photo's after August 25th or so
Here are the specs:
- .68 Cal
- Under barrel spring fed ~19+1 round magazine. The last 2 shots are ALWAYS tock and cock.
- 12 gram powered (approximately 25 shots per 12 gram).
- Lever change quick change integrated in the marker ( Sidekick lever change w/ long lever)
- Spyder style valve retention for easy removal and maintenance. It will come out the front. Use a 1/4" rod to push it out
- Cocker barrel threading
- Freak Jr. flat black 2 piece barrel with insert to prevent rollouts, improve efficiency, and improve accuracy. Its not that another barrel could not perform the same function, but this fit my needs, availability is not an issue, the price is decent, and most people seem to have freaks already to expand on the inserts.
-ATI 2 piece barrel/feed clamp that will accomodate other barrels than standard.
-Internal velocity adjustment, more on this later in the post.
-Supports Mossberg 500 grip accessories and shoulder stocks. It comes standard with the ATI pistol grip shown.
- Sheridan valve system.
-Dust black anodizing
-A complete, ready to use marker right out of the box.
-CCI pierce pin
-Sequential (!!!!!!!!) serial numbers will be hand stamped. "DSG - XXX"
OK, now to the down and dirty, the price:
As shown, complete, standard design DSG: $780 USD plus shipping. Sorry the price had to go up. No great price breaks for me this time.
Canadians ( or anyone else for that matter) can pay in Canadian funds but you must tell me when you order. The invoiced amount is what you pay no matter what the rates do before you pay.
Shipping in Canada will be $30 USD
Shipping to the US will be $40 USD
This includes Canada post expedited parcel delivery service and insurance for full value.
If you choose to remove stock parts from your order, I take no responsibility whatsoever how your parts fit, function or look with the parts I have supplied. That being said, if you would like to save yourself some money you can order the marker without some of the off the shelf parts. I have also provided some optional parts that just aren’t cost effective for me to supply in the base price. A “-“ in front means you remove that price from the base price, a “+” means that you add that to the base price, or a combination of the two.
-$70 US No barrel.
-$15 US No Grip. ATI Mossberg 500 parts fit, no guarantee that units from other than ATI will fit.
+65 US External velocity adjuster and key. Without this you need to remove the grip to adjust velocity, no need to degas.
+5 US Raw aluminum parts, you take car of your own anodizing.
The way it works
If you decide to order one ( or 5 if you want :) )
-PM me with what you want to order. INCLUDE YOUR PAYPAL ADDRESS so I can invoice you.
-Post in the thread as well what you wanted to order so that there is an easily accessible “paper” trail in case you ( or I ) lose your PM’s.
-I will send you a paypal invoice for 50% of what you are ordering. You will get my name, address, the amount of the invoice, details of what you have ordered.
-pay the invoice.
-The sales deadline will be Oct 31st. You have to pay on or before this date!!
-Any changes/customization that you ask for ( other than those listed) will be completed at the end of the manufacturing process. I can handle any customization that you want, but it puts your shipment to the end of the list. I want this production process to proceed as smoothly as possible, building 10 completely custom makers when I am supposed to be building 10 identical markers is not efficient.
-Any changes to your order will change the amount of down payment required, that difference is due when you request the change.
-Customizing will be charged according to hours and materials used. Payment is due before I ship.
-Based on my current schedule, I believe I can complete fabrication in 10 weeks for up to 20 markers. Less than 20 may or may not be less, more than 20 will likely be more.
- Your down payment is part of the contract with me. It shows that you have ordered in good faith and wish to complete the transaction. It is non refundable, don’t ask for a refund. The only way that you will get that money back is if I cannot complete the order.
-You will recieve the second invoice for the other half of your payment,plus shipping when yours is ready to ship. Other shipping options are available for an additional charge.
DSG :: Disassembly.flv video by duke737 - Photobucket
DSG :: Reassembly.flv video by duke737 - Photobucket
I'm very interested. Need to see if i can come up with the down payment by deadline.
Woohoo somebody is paying attention!
If I can muster the funds; I'll jump into this as well. Definitely regret having to backout the first time around. Now I'm paying extra lol
Edit: lol, just realized, its either this or the revolver for me. Oh decisions decisions
damn, I would be broke right now...
If this came up a month later I would be in... Ive got to get my car inspected in the end of October, and that is almost always expensive :(
PM sent I'm down for one with an External velocity adjuster and key.
Will this be a reproduction of the previously released DSG or will it include any modifications?
Same as the last run other than a couple of minor mods to eliminate the chances of farting. IE fixing it before instead of after the fact.
If you really want a tube with a spring retractor Meph I can make one. It's not like I don't already have all the dimensions.
|All times are GMT -4. The time now is 09:44 AM.|
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC