|Pump Guns Is there anything more pure than a pump gun?|
| ||Thread Tools||Search this Thread|
|10-02-2013, 07:14 PM||#1 (permalink)|
Join Date: Mar 2007
Location: Detroit MI
Retro 7 Serial number 36
Slight anno wear under the pump handle, there is also some grease on the lower tube in the pictures, started putting it on there to combat the anno rub, it helped a lot.
Stock barrel and a factory freak bored barrel, I never received the stock screws to hold the pump handle or feedtube on so I just grabbed some from the hardware store.
The top tube has a small ding one the top lip only visible when you look into the hole where you stick your ten round tube. It was damaged when it was shipped to me.
See the rest of the gallery HERE
Last edited by weekendballer; 04-06-2014 at 10:44 PM.
|10-02-2013, 07:23 PM||#2 (permalink)|
Slowly making progress
Join Date: Apr 2008
Location: Vail, AZ
Saw this earlier: https://www.mcarterbrown.com/forums/w...retro-7-a.html
|10-02-2013, 08:02 PM||#3 (permalink)|
Ridin' The ShortBus
Is this my old one? Or you are the original owner?
|10-03-2013, 10:26 PM||#5 (permalink)|
Join Date: Jul 2011
My old Retro. It looks like it still has the brass screws holding the pump. I added those to make it holster friendly and they match the brass screws blocking the valve ports.
https://www.mcarterbrown.com/forums/f...-feedback.html My link sucks. This is why I operate a CNC machine instead of program one.
|10-24-2013, 04:05 PM||#10 (permalink)|
Pumps in the Woods
Join Date: Jan 2010
Location: Sale Creek, Tennessee
Since you're looking at trades would you like a KP2?
Anything worth doing is worth over doing, Moderation is for Cowards
"Make (your attacker) advance through a wall of bullets. I may get killed with my own gun, but he’s gonna have to beat me to death with it, ‘cause it’s going to be empty." Clint Smith
|Thread Tools||Search this Thread|