|Pump Guns Is there anything more pure than a pump gun?|
| ||Thread Tools||Search this Thread|
|12-21-2018, 01:56 AM||#1 (permalink)|
Join Date: Dec 2016
Black Hammer 7 with extras and now a tank
Sold on ebay
$225 USD PayPal shipped con US
(Updated pictures with handle its shipping with)
Hammer 7 second view https://imgur.com/a/TxITWiq
Tippmann 20 ci 3k tank
both the stock and 14 inch CP freak xl bored barrel.(no inserts)
Stock and Lapco feed neck (much easier to remove and install)
That part that covers the feed neck hole when not in use
Shoots great no leaks and has been used once only. The magazines have had their tabs sanded slightly to work better with first strikes. Also I engraved numbers on the bottom of them. This was to help me fine tune the tabs. If one had problems loading FSRs I remembered the number and worked on it later. I haven't had any jams with these magazines, I believe them to be perfect (but sold as is just in case)
Last edited by Otnasir; 12-28-2018 at 09:30 PM. Reason: Updated
|12-21-2018, 09:41 PM||#2 (permalink)|
Join Date: Feb 2017
Can you give any insight into how to make a pump handle pictured?
|12-21-2018, 10:10 PM||#3 (permalink)|
Join Date: Dec 2016
Cut the connecting back part off
Take a belt sander and flatten the top part (where you would ordinary use a picatiny rail)
Next cut down your pump handle
Next and this is vey important, fill the back two chamber with black epoxy. BE VERY CAREFULL not to put to much. Don't block the hole for guide rod. Have tons of q tips ready to wipe off mistakes.
Let sit 1 hour
Turn handle over and fill bottom with epoxy
Let sit a day
Sand handle down till flat. Best to put a slight angle on it (see pictures bellow) AND DONT OVER DO IT. Keep testing to see how close the new grip will be to the gun when pumped back.
Test where exactly you want new grip, being carefully not to interfere with pump stroke
Paint epoxy with a brush on both surfaces.
Put together and set so that it is level and won't slide.
Wait a day
Pictures of my other hammer 7 can be found here Paintball guns https://imgur.com/gallery/nMfszYK
Better job on this one
Last edited by Otnasir; 12-24-2018 at 09:52 PM.
|Thread Tools||Search this Thread|