|Pump Guns Is there anything more pure than a pump gun?|
| ||Thread Tools||Search this Thread|
|12-26-2018, 09:00 PM||#1 (permalink)|
Join Date: Nov 2011
CCM/Inception/Works Cocker $450
I played with this guy at Boston Paintball's SantaBall and decided the phantom was more my cup of tea. As such I am going to move her on. What we have is a gen 3 works body which were milled by ccm if i am correct, full ccm lower and bolt, the bolt pin has been replaced with a delrin one i had laying around, a ccm ez pump kit, inception designs asa, inception on/off, palmers fatty reg(fresh rebuild) with dust ccm fitting, ccm low rise or no rise asa cant remember.
In full disclosure it was shooting low around 260 fps, I am fairly certain this is my fault and its poorly tuned based on how bad it was farting. The pump kit also seemed to have more play in it than it should but I have never had a ez kit before so again could just be me. Lastly the front hex piece of the guide rod on the pump kit had some idiot marks which have been covered with sharpie.
Forgot to mention for those it matters too, the marker is drilled as shown in the second picture, please note the second poicture was from the prior owner the pneus are not included, and reg and bolt pin have changed as stated above.
here is a pic if you guys want more let me know.
I am looking for $450 shipped and paypaled.
Last edited by dkv23; 12-27-2018 at 06:56 AM.
|12-26-2018, 10:04 PM||#2 (permalink)|
Join Date: Apr 2010
Location: With Loggy and Jenny
A most excellent marker. This will be sold before morning
|Thread Tools||Search this Thread|