|
             |
 |
|
 |
| | Thread Tools | Search this Thread |
02-27-2014, 05:48 PM
| #1 (permalink) |
| Active Member  Join Date: Jun 2011 | 12gram sniper build questions
Hey I want to build a stock class sniper and I was wondering if these parts would work well? I'm mainly concerned about the valve kit. Would I be able to shoot 295 fps and get ~40 shots off a 12 gram? Would I be fine with that valve kit, half block wgp bolt, and a maddman spring kit? I plan to screw the 12 gram changer straight into the vertical asa. Would it be worth it to run a regulator? If so, what is a good reg for co2?  |
|  |
|
02-27-2014, 09:15 PM
| #2 (permalink) |
| XYZZY  Join Date: Aug 2006 Location: People's Republic of Massachusetts   |
I had an old square bodied Sniper done up for 12 grams with a stock older valve and I was getting close to 40 shots at 270fps with a CCI quick changer going strait into the vertical. All it took was an afternoon with a spring kit, a chrony, and a lot of patience.
__________________ If your glasses fog up and you want to make your own mask fans, here's how; JT fans with speed controlUpdated 11/2015 "My happiness doesn't depend on anything. My heart is always happy. I do have anger issues though." |
|
| |
|
02-27-2014, 09:50 PM
| #3 (permalink) |
| Fluffy Bunnies for life!!  Join Date: Jul 2010 Location: Formerly Green  |
Not at 295 you won't get 40 shots. I get about 30 at 275 to 280. Otherwise all the pieces you have listed are a good starting point. If you play with your springs and drop your velocity then you should be able to get close to what you are after. Look in the WGP section for ideas.
__________________ America is all about speed. Hot, nasty, bada$$ speed. -Eleanor Roosevelt, 1936 FLUFFY BUNNIES PUMP  Ebay Feedback MCB Feedback |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
