FS-Brass eagle nightmares SB (2) LOW PRICE!
I came across these two oldies, they both have a leak and will need new o-rings! Being sold as is! Someone with time can get these shooting great!
First i have a Nightmare SB, has an constant air adapter, safety is missing the ball bearing but have the spring for it. This one leaks SOMETIMES, if you air it up and take a few shots it stops leaking. Also was able to chrono this and it is shooting right around 200 fps. So a new spring or washers would be needed.
Also this one must have been a home modification to make it direct feed as well, note the big hole in one side and custom made feed for it.
Second is a Nightmare SB Comp, also has constant air adapter, safety is missing the ball but spring is included. Put 2 new o-rings on the valve and oiled it up! The marker cocks and shoots. Also has the stock that was cut to allow for air tanks, there is a crack on both sides of the grip, could be fixed as they have not broken completely off. This one is shooting right around 160 fps- so needs a new spring.
Or buy both for $200 shipped will add all the extra stuff below for free!!!!
also have one of the rear plugs for 12 gram co2. First come first serve with the markers above.
Another adapter for constant air - 10 shipped
Remote setup for something possibly for a splatmaster- does not fit the nightmares- $20 shipped
Update, able to fix most of the leaks in the first one, still has minor leak down the barrel pretty sure it needs a new valve seat as i tried flipping it and it didnt work. The second one was fixed and should be leak free now.
Just lowered the price for the first nightmare to $100 shipped!
lowest price around!
will do a 2 4 1 deal as well.
Your remote line constant air adaptor looks like a splatmaster ca.
Good deals on the nightmares considering they include the CA adapters.
|All times are GMT -4. The time now is 11:31 PM.|
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC