| ||Thread Tools||Search this Thread|
|07-27-2017, 12:51 AM||#2 (permalink)|
Join Date: Feb 2012
Use whatever size bit you like really.. and use a internal hex bit screw as seen here, can be found at just about any hardware store..
[/B][/B]B][/B]Bought something from me? Did I buy something from you? Share transaction feedback here
My Drinking Team Has A Paintball Problem.
I Shot The Sheriff,The Deputy And The Ref.. But We All Knew The Ref Had It Coming.
|07-27-2017, 08:30 AM||#3 (permalink)|
Some People Juggle Geese
Join Date: Mar 2006
Location: Bodymore, Murderland
I like using 5/16-18.
Drill a hole using a letter J drill bit. Tap with a 5/16-18 tap. Buy a 5/16-18 set screw (either cup or flat point) with a length of 3/8 to 1/2in.
Then take an old nail that fits inside the ID of the spring cut it down to about 1/2 with the head still on it and use that as a spring guide.
|07-27-2017, 10:18 AM||#4 (permalink)|
Brass Monkey Customs
Join Date: Oct 2006
Location: Bowie MD
I use 3/8-24. It allows the spring to be replaced without opening the marker up. Just back out the velocity adjuster, swap springs and reinstall the adjuster.
The other nice part is the existing depression in the back cap will act as a guide for the bit, making it easier to drill the hole in the correct spot.
Google "tap drill chart"
|Thread Tools||Search this Thread|