|shooter4life ||04-23-2012 09:10 PM |
Home Made angel 90* grips
Taken by gearheadforlife Untitled | Flickr - Photo Sharing!
Besides the larger screws, which I am looking for smaller 4mm ones, they are finished. Edges are clipped and there is frosted plastic die cut behind them so no mess gets into the frame or on the board. Let me know what you think of them. Also made a copper set , but finishing the black matte and copper feedneck to match them!
|owenator ||06-03-2012 05:56 PM |
They are quite good to look at. The trigger could use a little shaping up along the back, but that is just aesthetics :D good work!
|shooter4life ||06-03-2012 06:03 PM |
thanks, appreciate the critique. I have 4 diff. triggers for this gun. I want to snag that single frame on ebay and make one for that...Figure that would be cool. I plan on making a thicker trigger now that I have 1/4 inch lexan to play with.
|Dr. VonDeafingson ||06-17-2012 06:09 PM |
Those are slick my man.
|shooter4life ||06-17-2012 07:50 PM |
Hey thanks- I have sold a set of the thin ones and am looking to market the thicker ones.
|Dr. VonDeafingson ||06-18-2012 11:02 AM |
If I still had any Angels (I used to be a big angel whore) I'd totally be interested in some. Have you tried over on the angel owners forum and PBN? Might be more of a demand over there.
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC