|WTB Want to Buy!! The object you desire may just be a post away. Just ask!|
| ||Thread Tools||Search this Thread|
|05-01-2006, 05:06 PM||#1 (permalink)|
Join Date: Mar 2006
Location: Sarasota, FL
Automag Repair Kit
I have a older ANS Gen-X inline reg and I have a leak. That is right I have a leak not take a leak
I have heard that the inside is basically like a AGD valve. So anyway I was wondering if anyone here had the parts or a kit to rebuild the guts of this things. It is not Stab. but it works pretty well for us guys that focus on quality not quantity shooting
Thanks for any help......
|06-05-2006, 10:17 PM||#2 (permalink)|
Yes you are right!!!
You herded right; your ans reg will take mag parts. But you don’t need the hole kit, just the reg seat, piston o-ring, and the reg body o-ring. Where is the leak? Most likely out the bottom (the reg adjuster) and that is either the piston o-ring or the piston. Or where the 2 half’s come together and that is the reg body o-ring. The reg valve pin is totally different from mag and ans reg. Hey I hope this helps.
|06-06-2006, 08:17 AM||#4 (permalink)|
I think I have that stuff
I know I have regulator seats. I can check later tonight if I have the other stuff to.
THere's lots of parts in an automag repair kit you won't need so Your probibly better off just hunting down those 3 pieces pwpaintball sugested (I know nothing about ANS regs so I can't help out there)
|Thread Tools||Search this Thread|