Inception Designs Factory Mini Predator - $900 Shipped
Barrel set with four backs and two 14" fronts
New laser cut foam and case
SAS trigger plate
Trident bolt
This gun is used, but in very good shape. Minor signs of use, but nothing crazy. Shoots terrific!
2018 Freeflow Millennium - $1000 Shipped Red and Gray Splash
Freak Milled DYE Back.
Mix of FF and ST parts
This autococker has been worked on by Docfire and had Shocktech parts installed. Believe the lower tube is all ST, Ram is ST.
Frame has a ST trigger plate. Nice trigger work on this one. Different than I do, but excellent work for sure. Feels like a round lug. Really nice anodizing, smooth and deep.
Dirk Gadberry? Custom WGP Minicocker - $900 Shipped
This is a pretty interesting new build, on a WGP factory mini-cocker base. Serial number 3943. I believe this to be a Pre-2K minicocker that has been customized.
It has been drilled to 2k spec, including banjo and IVG threading. The feedneck has been modified into a clamp that takes Shocktech rings. Drilled for detents on both side. The 2K modifications were done by Angry Antle.
This body is P-Blocked with a custom bolt. The length is non-standard, similar to the Works bolts. This bolt is delrin with no o-rings and is beautifully fitted to the body. Very high flowing bolt with an angled inlet. The bolt was made by Chris Nelson.
The modernized/feedneck portions are not anodized, but the p-blocking and rail are anodized.
Shoots easily at 300PSI. Incredibly smooth and just delightful to shoot. I am currently investigating who did the original body, but am not certain. If you do have info on this body, please let me know. Likely a Dirk Gadberry but not confirmed.
Truly a custom piece of work fitted with:
Inception PWR Barrel with choice of insert.
CCM style lowers from ACP
Inception Rip Frame
Inception HPR
Inception ON/Off
Shocktech Ram, ID 3-way, PPS LPR, Lapco flush banjo
99 STO Minicocker - $800 shipped
Gunfighter, t-slotted with POPS
Body milled for modern clamping necks
Shocktech pneumatics, volumizer
Freak XL with ACP tip and 684 insert
One body screw is helicoiled, rear frame screw if I remember correctly
Arrow Precision Sovereign - Unused in game, but retuned to 300PSI and timing tightened, added clamping feedneck. This one was not usable out of the box from AP. Shoots good now. Definitely an underrated marker. Support in this country is poop, but product is great. 3-ways on these are always a little fiddly due to plate alignment pushing on the timing rod. So if you hold the trigger back hard it will leak a little sometimes.
$400 with stock barrel $450 shipped with Freak (new back, used front)
LNT (Late Night Tooling) Ridgeback Hoseless Autococker $1000 shipped - Anodizing by Outlaw Anodizing - New build, used bolt, anodized pneumatics
Green Acid with Splash
Super low pressure build, very quiet. Originally built by another maker but never used. They did not care for the feel and I purchased it and rebuilt it to my preferences. Never played with but shoots great.
STO/ST Pneumatics
Belsales Bolt
Freak Insert Stella with .689 front
Inception Lower Tube
RKJ Tribute Minicocker - $1000 Shipped
Used- Just took this all apart to respring and tune, new valve, medium heavy hammer. Nice light action now. Runs 300-350 PSI.
Freaked back with DYE tip
ANS Frame
ST 3-way
AKA Reg
FF Ram
Custom Ano Inception Hornet - 1050 shipped (or 950 with no barrel)
This had been purchased as a body kit and put together with some parts that didn't work great together. I acquired the kit and rebuilt with all new ID internals including frame internals.
Rebuilt all the pneumatics and set this little guy up with an SAS plate.
New DW barrel (no insert included)
CP Reg, POPS ASA
Clear and Black Mini Ripper, Seltzer - $1400 Shipped
Brand New Build
Inception Internals
Shocktech LPR
NOS plate
Insert barrel
2018 Freeflow Fulcrum in Olive - $1000 Shipped
ID Stella .680 and DYE ULS .684
Updated with new version bolt
Great shooting, #11 of 24, what else can you say?
2018 Freeflow Fight Club Caliber in gorgeous polished blue - $1000 Shipped
DYE UL .684
Updated with new version bolt
Looks and shoots great, very minor wear under backblock. Common with this body style.
Mini Rippers Raw - 1 Available - $375 shipped
Barrel set with four backs and two 14" fronts
New laser cut foam and case
SAS trigger plate
Trident bolt
This gun is used, but in very good shape. Minor signs of use, but nothing crazy. Shoots terrific!
2018 Freeflow Millennium - $1000 Shipped Red and Gray Splash
Freak Milled DYE Back.
Mix of FF and ST parts
This autococker has been worked on by Docfire and had Shocktech parts installed. Believe the lower tube is all ST, Ram is ST.
Frame has a ST trigger plate. Nice trigger work on this one. Different than I do, but excellent work for sure. Feels like a round lug. Really nice anodizing, smooth and deep.
Dirk Gadberry? Custom WGP Minicocker - $900 Shipped
This is a pretty interesting new build, on a WGP factory mini-cocker base. Serial number 3943. I believe this to be a Pre-2K minicocker that has been customized.
It has been drilled to 2k spec, including banjo and IVG threading. The feedneck has been modified into a clamp that takes Shocktech rings. Drilled for detents on both side. The 2K modifications were done by Angry Antle.
This body is P-Blocked with a custom bolt. The length is non-standard, similar to the Works bolts. This bolt is delrin with no o-rings and is beautifully fitted to the body. Very high flowing bolt with an angled inlet. The bolt was made by Chris Nelson.
The modernized/feedneck portions are not anodized, but the p-blocking and rail are anodized.
Shoots easily at 300PSI. Incredibly smooth and just delightful to shoot. I am currently investigating who did the original body, but am not certain. If you do have info on this body, please let me know. Likely a Dirk Gadberry but not confirmed.
Truly a custom piece of work fitted with:
Inception PWR Barrel with choice of insert.
CCM style lowers from ACP
Inception Rip Frame
Inception HPR
Inception ON/Off
Shocktech Ram, ID 3-way, PPS LPR, Lapco flush banjo
99 STO Minicocker - $800 shipped
Gunfighter, t-slotted with POPS
Body milled for modern clamping necks
Shocktech pneumatics, volumizer
Freak XL with ACP tip and 684 insert
One body screw is helicoiled, rear frame screw if I remember correctly
Arrow Precision Sovereign - Unused in game, but retuned to 300PSI and timing tightened, added clamping feedneck. This one was not usable out of the box from AP. Shoots good now. Definitely an underrated marker. Support in this country is poop, but product is great. 3-ways on these are always a little fiddly due to plate alignment pushing on the timing rod. So if you hold the trigger back hard it will leak a little sometimes.
$400 with stock barrel $450 shipped with Freak (new back, used front)
LNT (Late Night Tooling) Ridgeback Hoseless Autococker $1000 shipped - Anodizing by Outlaw Anodizing - New build, used bolt, anodized pneumatics
Green Acid with Splash
Super low pressure build, very quiet. Originally built by another maker but never used. They did not care for the feel and I purchased it and rebuilt it to my preferences. Never played with but shoots great.
STO/ST Pneumatics
Belsales Bolt
Freak Insert Stella with .689 front
Inception Lower Tube
RKJ Tribute Minicocker - $1000 Shipped
Used- Just took this all apart to respring and tune, new valve, medium heavy hammer. Nice light action now. Runs 300-350 PSI.
Freaked back with DYE tip
ANS Frame
ST 3-way
AKA Reg
FF Ram
Custom Ano Inception Hornet - 1050 shipped (or 950 with no barrel)
This had been purchased as a body kit and put together with some parts that didn't work great together. I acquired the kit and rebuilt with all new ID internals including frame internals.
Rebuilt all the pneumatics and set this little guy up with an SAS plate.
New DW barrel (no insert included)
CP Reg, POPS ASA
Clear and Black Mini Ripper, Seltzer - $1400 Shipped
Brand New Build
Inception Internals
Shocktech LPR
NOS plate
Insert barrel
2018 Freeflow Fulcrum in Olive - $1000 Shipped
ID Stella .680 and DYE ULS .684
Updated with new version bolt
Great shooting, #11 of 24, what else can you say?
2018 Freeflow Fight Club Caliber in gorgeous polished blue - $1000 Shipped
DYE UL .684
Updated with new version bolt
Looks and shoots great, very minor wear under backblock. Common with this body style.
Mini Rippers Raw - 1 Available - $375 shipped
Comment