Unibody Phantom

[DropDeadFred]

Found what I wanted, all payment have been sent. Thank you all for participating in this episode of Paintball Whoreding with Fred.

[DropDeadFred]

I have a unibody (body/barrel) I'd let go of. It's the mid length, whatever that's called.

PM'd

[Mechstar]

I don’t want to hijack the thread…just inform that once the OP Drop Dead Fred gets what he is looking for…I am still searching for a good shape “Shadow” length (8”) body for a build. I just bumped the threads in the WTB and Members Buy/Sell sections….0k, carry on!

[Bleeds]

I have a unibody (body/barrel) I'd let go of. It's the mid length, whatever that's called.

[djeclypse]

Bump, found one but could use one more....

I have a gloss black unibody breech/barrel available if you are interested

[DropDeadFred]

Bump, found one but could use one more....

[lhamilton1807]

I’ve got a black one with a 14” spiral-ported barrel. Stock over-barrel pump, but the guts were all replaced. New power tube, valve body/cup seal, hammer, and TPC.The right-feed feedneck is threaded and has a bare aluminum insert that is ready for a 45 elbow. There’s a brass trigger shoe installed as well. Only a few hundred shots on the new internals - she’s ready to go.

I have the parts that were replaced in a baggie and have a plastic-tipped adjuster tool - if you want those can be included.

[superman]

Mine ended up not being a phantom. It was some other nelson i ended up posting in the misc section.

[NONOBLITUS]

These are the extras that I also have with that one.

[NONOBLITUS]

Here it is , sending you a pm as well.

[NONOBLITUS]

Yup I have all the parts minus the M16 grip and YES the frame does NOT have holes in it. Tonight after work I will pull out everything and put it back together so you can see it.

[DropDeadFred]

Here’s the body and the rest can be all put back on it if this interests you. The factory Tac welds on the feedneck are broke but it’s been like that for years and still used.

All parts are accounted for? Does it have the old style trigger frame without holes for a VSC? What's your asking price?

[NONOBLITUS]

Here’s the body and the rest can be all put back on it if this interests you. The factory Tac welds on the feedneck are broke but it’s been like that for years and still used.

[NONOBLITUS]

Sorry I totally forgot about this. I’ll dig out the one I have.

[80F100]

I'm following this