instagram takipci satin al - instagram takipci satin al mobil odeme - takipci satin al

bahis siteleri - deneme bonusu - casino siteleri

bahis siteleri - kacak bahis - canli bahis

goldenbahis - makrobet - cepbahis

cratosslot - cratosslot giris - cratosslot

Announcement

Collapse
No announcement yet.

Geo 3.5 issue help.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Geo 3.5 issue help.

    Doesnt shoot the first couple pulls then shoots fine after, any ideas?

    #2
    Try installing a fresh Duracell battery to start. Next clean off all the old grease and replace the 015 and 14x2 orings on the bolt and apply fresh grease (not a lot). Make sure the dwell is set at 26.2 as well. If you are still having issues the solenoid might be getting weak. Try going into the hardware menu and putting the solenoid on medium or high output.
    ChuckLove on YouTube

    Comment


      #3
      90% of the time itโ€™s a battery issue make sure you are using a good name brand one.

      Comment


        #4
        Ok thank you guys i forgot to mention i just swapped in a brand new solenoid ill try out these suggestions thanks!

        Comment


          #5
          Also Setting the restrictor too low (especially in extreme weather conditions) may result in: low velocity, inconsistent velocity or preventing the bolt from cycling. If this occurs try Increasing the SFR flow setting.

          Comment


          • ChuckLove

            ChuckLove

            commented
            Editing a comment
            Oh ya I forgot to mention that one.
        Working...
        X