3d printing Splatmaster parts?

[Carp]

Are those drop in kits still available? Tried to pm Kit but wouldn't let me

Your best chance is to post here and get in line for any possible future runs.😉

Splatmaster drop in kit

[William_owc]

Are those drop in kits still available? Tried to pm Kit but wouldn't let me

[Chuck E Ducky]

MCB member KIT produced them. It replaces internals with all metal internals freak bore barrel and lighter springs and the bucket changer in the grip is Asa threaded. I put a palmers 90 on mine so I can use an ICD lever changer off the back.

[ShaunFullerton]

I'm new to the NSG splatmaster scene. What and how did you get the bucket changer and what looks to be adjustable velocity on the marker? (Forgive my ignorance, I just ordered my nsg today)

[Chuck E Ducky]

Worked well for me…

[Juice9869]

Is there any update on these extended figure 8’s?

[Raven911]

That worked great. Thank you!

[Rainmaker]

Here's a file for the standard figure 8, no frills or detent or anything, just stock replacement piece.

Splatmaster Figure 8

[XEMON]

Ok, I'll make some and put a sale thread in the dealer section 👍

[Rainmaker]

Yeah, an extra 2 balls is about right. But the other benefit is that you COULD (if you wanted to) dump 10 balls in the feed, and then also jam another tube in and leave it, for a total of 20 rounds ready to rock and cock!

However, my version is having a bit of an issue at the moment that I'm working through. So it's not ready for play.

[OpusX]

I made those a while back, if there is interest i can make a few (when i have the CCI feed done (which should be in the next couple weeks ...))

There is interest

[XEMON]

Let me finish the current batch of CCI feed and ill make a sale thread.

[Raven911]

How much are the ones with the tippmann detent

[XEMON]

I made those a while back, if there is interest i can make a few (when i have the CCI feed done (which should be in the next couple weeks ...))

The standard figure 8 is a nice fit, the long one has a Tippmann detent so you don't have to shove the tube down the body.

PS: looks like i was also working on one with a top rail (picatinny), but i never finished that ...

Speed wheel with complete 3D printed plug (only fit the "regular"):


Detent holding the paint:

[JonM]

So far as pistols go, Sheridan and 007 parts so far. My printer has been sitting idle for months too. Did you need something specific?