Where to start?

[Danny72]

Been playing ball for about 16 years now. Always wanted a AGD but never had the money. Trying to broaden my collection. Currently I’ve got a Luxe X, CS1, Shocker RSX, CCI VSC, PGP, WGP Black Magic, and a Mech’d Ion........as well as a weirdo M1 Carbine project that I want to do between now and D-Day 2021

Any-who, what AGD Marker should I go with? Everything that I currently have I am decently savvy on....but I’m not sure where to go with “The Mag” realm. Initially as a kiddo when the Spec Ops Paintball brand/woodsball was at its height, I was OBSESSED with the Q-Bow.....and am still intrigued. Problem is, is sorting all that. I could go one of two ways

SP Ion Q-bow/mech’d
or
AGD Q-bow
or
Ditch both of those ideas and go with some of your opinions! I’m down to do an E-mag or a Mech....either way this is just supposed to be a “Fun-Gun”
I’m also flirting with the idea of a warp feed

[Alexndl]

There is tons of options... but you can try to split into couple of section

Body, I would recommend aluminium one that is cocker thread or get Doc adaptor if you use a classic body since it will match your current barrels
you have AGD ULE, tach one and plenty of other one to chose from

If you want a longbow, you need a tach one body

If you want a warp feed, you are in luck I have one for sale with a cut rail for it (PM me if you are interested) would work for warp or Qbow

Valve this one is simple and only depend on your budget
classic stainless, cheap, reliable and easy to fix, Xmag or retro/emag
if you have the budget go with Xvalve wich have level 10 included (mech anti chop)

Frame, plenty of option here too, Numech, intelliframe, Luke and dont overlook the classic CF frame (cheap and built like a tank)

Mag are easy to work with so you could even get couple of body depending on what you want to use for a specific day of play

[Lt. head-shot]

After having both the Q bow and the Longbow back in the day... stay away from the Qloader system. It is VERY hard on paint. I would think modern tournament paint would instantly be blendered by it.

As for mags, the X valve w/ Level 10 kit is the gold standard for mags and has been for over a decade. Stick with that valve, and then anything else is pretty much aesthetic preference. ULE for a sleek look, Tac one for the Milsim look, etc.

[nerdcore]

Superman has a lot of mag parts, you may want to talk to him about piecing something together for you. Or if you've got so much disposable income that it hurts your wallet, you can still get a full build direct from AGD.

I started with a Minimag maybe a year or two ago. Somehow, after a journey through BST & Nummech from then to now, there's nothing left of the original Minimag except the sear assembly. Funny how MCB does that to people...

[Danny72]

Superman has a lot of mag parts, you may want to talk to him about piecing something together for you. Or if you've got so much disposable income that it hurts your wallet, you can still get a full build direct from AGD.

I started with a Minimag maybe a year or two ago. Somehow, after a journey through BST & Nummech from then to now, there's nothing left of the original Minimag except the sear assembly. Funny how MCB does that to people...

Right? Thats what happened with a lot of my guns.....the initial buy ends up being more of a commitment to a project than the actual base of the project hahaha

[Danny72]

Nail in the coffin, on the hunt for a Tac One, what should I look for in one? Level 10 ect??

[BrickHaus]

Superman has a lot of mag parts, you may want to talk to him about piecing something together for you. Or if you've got so much disposable income that it hurts your wallet, you can still get a full build direct from AGD.

I started with a Minimag maybe a year or two ago. Somehow, after a journey through BST & Nummech from then to now, there's nothing left of the original Minimag except the sear assembly. Funny how MCB does that to people...

Thats just mags in general. They are a parts swap platform which makes them simple and fun to build. To me half of the adventure is building the project.

If we are talking the coolest mags ever Id either want a dallarah mag or one of those use mini mag bodies that are center feed with cocker threads and the mini mag shroud. Wither a single trigger nmmech frame. Orone of those rpg frames that are the 90*.

Danny, Next question is u wanna go ULE, or rt? Lol

[Danny72]

Thats just mags in general. They are a parts swap platform which makes them simple and fun to build. To me half of the adventure is building the project.

If we are talking the coolest mags ever Id either want a dallarah mag or one of those use mini mag bodies that are center feed with cocker threads and the mini mag shroud. Wither a single trigger nmmech frame. Orone of those rpg frames that are the 90*.

Danny, Next question is u wanna go ULE, or rt? Lol

Id say ULE because thats all I know to be honest, whats RT?

[BrickHaus]

The on off assembly. Rt on off is q reactive trigger. You can get it to bounce and get some decent rof out of them rather than having them walkable. (Ult)

You can shorten the on off pin and create a full automatautomatibut its frowned upon. I had one back in the day,, it was a damn buzzsaw.

[LukeAO]

"Where to start?"

Start from scratch.. https://lukescustoms.com/armadachlfgpreorder.html