I started my patina experiment today. I used some of the brass tubing off of JeeperCreeper wind chime that I won in last years walzmas. I didn't bother polishing or masking, but just wanted to compare the results of spraying the ammonia based acid vs sponging it on. I applied it around 2:30 pm, instructions say to wait 24 hours for the results before the sealing process. I'll snag some photos when I got home from the bar, but things look promising so far.
-
-
The top tube was sprayed whereas the bottom one was sponged on. I suspected that sponging would work better than spraying, but figured I'd test it out. It seems like the application worked better with the sponge, and I like the pattern of it more. I'm gonna give them them a bit over 24 hours then seal the sponged one and go town on polishing the patina off the other one for the next round of testing.Comment
Comment