I need a shocker/nerve or Smart parts expert to answer a question about these platforms for me if possible. I see on the Shocker SFT schematic listed on ZDSPB that it says shocker/nerve at the top. upon further investigation it appears that the cricket board is the same for the nerve and shocker?
Nerve & Shocker SFT upper/lower board compatibility.
Collapse
X
-
Tags: None
-
-
They were interchangeable but the eye ribbons were not.
I used to buy nerves to part into shockers for the short time shocktech sold body kits
Comment
-
Oh yeah the aftermarket boards and firmware exactly the same the dwells however will need to be tuned to each gun
Comment
-
Yes the only difference between a soft cricket board and nerve board is the nerve board had ramping standard. Whereas the original shocker board was semi only. I have never seen any documented differences regarding eye logic between the shocker or nerve, just some dimensional differences.
Comment
-
Some of the later aftermarket boards have a toggle for bounce or break beam eyes iirc.Originally posted by RPP View PostJust FYI. The nerve/SFT board is also compatible with the shocker NXT, but they require support for break beam eye logic, not just the reflective eye.
Virtue did for sure at least
Comment
-
-
I believe the base nxt shipped with an updated nerve board. Same base program just added compatibility for break beam eyes.Originally posted by RPP View PostJust FYI. The nerve/SFT board is also compatible with the shocker NXT, but they require support for break beam eye logic, not just the reflective eye.
Comment
Comment