My doh! moment for 10 round tube retention

[Spider!]

We were playing some 2v2 stick games a couple of weeks ago, and I was getting a little droop in the tubes in my pack. Those games are pretty busy since they devolve into 1v2 very quickly. It's been a couple of years since I sprayed my pack with rug grip spray, which worked well to hold onto the tubes, but the spray is a little expensive if that is all you are doing with it. I was watching a youtube for something that used rubber cement for a grip, just letting it dry. So now I have dabbed a little rubber cement on the nylon under each tube loop. It's cheaper, more direct, and a little more grippy.

It's new to me at least. 😋

[alpha_q_up]

I've heard of people having success using a dot of silicon on the inside of their packs to give the tube an extra bit of grip to hold onto my pb mafia Joyride has been amazing tk me so far any chance of it starting to wear imma splurge and buy another and try to "fix" my old one

[Nish]

I took a different approach and decided to wrap a little hockey tape around each tube, cheap and long lasting. Bonus if it helps me know which tubes are mine and it holds great.

[Grendel]

Similar to Nish's coaches tape I paint my tubes with a strip of tool grip.