Asked on Sept 11 ah the local store to order the back cap. On the 17 I was told they was waiting to bundle it in on their next bulk order. On Boxing Day I ordered online instead.
Attached Files
-
Dealer for: Roasted coffee and TechT products. -
-
A whole mess of 3d printed tpu stock class tube caps from shooter311
My gauntlets will no longer spill paint. Cant wait to get these on the field.
Velcor will save us...
Current MCB Feedback : https://www.mcarterbrown.com/forum/b...opusx-feedback
Legacy MCB Feedback (Wayback Machine)Comment
-
This slick Walzmas Armson pump!!
Rainmaker's feedback: https://www.mcarterbrown.com/forum/b...maker-feedback
Comment
-
Pictures later...
.685 CP barrel and CP reg for my e-Matrix
A bunch of 10 round tubes
Some JT mask parts from a Walzmas giveaway
Still waiting for my 12 gram Dynavalve from PPS - should be this week - and an Autococker SR project.Last edited by Jordan; 01-10-2022, 10:19 PM.Comment
-
-
2nd half of my Evil Gerbil order came in today so stoked about this one. Last year I lost my Team jersey at ICC. So I asked Eric if he could make me a new one to replace it. He thought maybe he had enough material to make one more but it ended up not being enough. So he hunted down the material I needed and built me another. Even threw in a Hat.Comment
-
Perfect I order them to size. Just measure your best fitting jersey and give them the measurements. They are all made to order so you can get them made any way you want. They have a mock neck (like the old renagades) or a V neck (like the Tigerstripe design jerseys). They can also add cuts up the sides so the jersey don’t bunch up around packs. He dose have size measurements on his website as well.
-
Got the DYE frame from Rickfactor2 and bough the WGP ranger locally. Trying to make what I would have expect when it came out of the factory instead of the cheap frame and expansion chamber it came with.
Will eventually try to have someone make a feedneck threaded adaptor to make it compatible for cocker threaded feedneck and install a shocktech feedneck I have
💀Team Ragnastock💀Comment
-
Comment
-
140 is a bit more than i an willing to spend, they also almost match... I'm looking for clashing greens. There some green pmi gel grips at discount paintball for like 10 shipped that I was considering trying out. -
There’s these green grips if your interested
https://www.ebay.com/itm/123237792466 -
I actually have those $10 ebay grips on my psychoballistics superbolt, i had fitment issues and had to cut the wraparound part off which left me with panels. I think they look good on that marker and would consider them if i can't find something else i like better.
-
-
you guys and your brass, figured I'd see what all the hype is about. don't even know what I bought. been clicking through bacci's site to figure it out.
Comment
-
Those are my favorite Sheridan (along with the Magnum).
The AT box is awesome, but can be a pain to put back together ... Don't open it if you don't have to ...
Also, this is a later model, probably some of the last run (identified by the cnc engraving on the right side)
PS: I put a mag frame and a velocity adjuster ... Great open class gun! -
I am surprised how smooth the pump is. It is leaking from the urethane(?) washers on that transfer tube, best place for replacements? I'll leave the AT alone for now and try it out, and bring some duck tape + zip ties if the handle brakes. I do have a spare agd frame I made into a failed Autococker slider...
-
-
Received my 10” Deadlywind with double porting and my stainless steel XL Freak inserts to go with itAttached FilesComment
-
-
Got my Doc’s “Nail” Autococker Bolt Pin. Using it on my T2. Now my Cram N Jam will clear the bolt pin with no problem!
Comment
Comment