You guys wanna help?

[shrompman420]

So I have been collecting AC parts for a while now and it's time to commit. So you guys wanna help? I will list the parts and you guys pick what you want to see.

So here is the list with options where available.
1. Shocktech rods pump and time
2. Inception grip forward with PE Vasa plug
3 Inception Designs volumizer
4 3ways options
Shocktech 3way, Inception Designs, belsales hollow point
5 lpr options
PP micro rock, Inception, ans jack hammer, aka lpr
6 valve sets
aka tornado, shocktech rat, belsales evo, or just bite the bullet and go 11/16
7. Ram
Inception, shocktech, freeflow
8 incep front block
9 hpr
aka 2liter+ in either black or a ccm aka in silver and black
10 I have a 90 degree swing frame I also have an Inception swing frame

[XEMON]

Witch ever way you go:
1) It looks hella cool
2) id go solid black 👍

In all seriousness, all the listed option are good choices, put what feel right that day and change it for the next day (or mid day 😋)

[shrompman420]

thanks man, im a little partial to the ans jack hamer for that old school look. was thinkin soild black as well but man the silver accents would look cool too.
i have silver knurled caps for the lpr hoses too!

[jokers]

This is tough for me because if you have all those items I want you to use the best but I also don't so you will sell me the stuff you do not use!

[shrompman420]

lets see whats left over, and let me know what you wanna see for parts all black?

[jokers]

shrompman420 For your marker I would do all black if you are selling something I am not picky on color right now.

[Alexndl]

Personally, I would go
ID 3 way
AKA LPR
AKA valve
Shocktech RAM

Look really good with the 90*

Nice build!

[shrompman420]

thanks man, im pretty excited, i have owned a number of cockers this is my first half block, from an old race frame gun.

[Chuck E Ducky]

Yup that’s the way I would go. That ID 3 way is just two easy to adjust.

[jokers]

My response to your options where available.
3ways options
Shocktech 3way, Inception Designs, belsales hollow point

I like the bomb and ID 3 way I think both are about the same the hollow point i feel is a good 3 way but it harder to time IMO.

Lpr options
PP micro rock, Inception, ans jack hammer, aka lpr

My vote is for the AKA LPR if you have one

Valve sets
aka tornado, shocktech rat, belsales evo, or just bite the bullet and go 11/16

Any of these would be great but I vote for the AKA.

Ram
Inception, shocktech, freeflow

I like the Inception Ram of those three, I have not used or played with a freeflow yet and TBH the swivel front on the shocktech ram is very nice and makes life a lot easier but ID for me.

HPR
aka 2liter+ in either black or a ccm aka in silver and black

I like the 2 liter in black.

I have a 90 degree swing frame I also have an Inception swing frame

This is something that you have to decide on your own and in my opinion that can only be done after a game or 5 a piece. If you shoot other markers and they have a 45 then that would be the way to go if you more 90 degree marker frames then go with 90 the reason being getting used to a different grip from one marker to another tends to throw your game off . Again this is my opinion.

[shrompman420]

Hey thanks for your input, as for frame I have played with a similar 90 swing before and like the feel. I have not used the inception frame yet i just picked it up in some trades. I have used other swing frames thru the years. the small difference of ergo dosent bother me. it seems like the thought is murder black, so might have to swap out the chrome clamp neck for black and maybe not use the shochtech t-rail.

[shrompman420]

And you guys seem to want the aka lpr, little suprising

[minimag03]

I assume you'll use the other parts on other builds? I that's the case, I'd go with whatever parts best match the cocker's milling pattern.

It has a lot of hard lines and 90* angles. Shocktech's parts would probably look better than others because of body's milling.

That's def not because I prefer the Shocktech parts. Besides their Bomb's design (not even the Bomb itself), I've always thought Shocktech's cocker stuff was mediocre.