Really fun, neat gun, I just won't use it enough.
Comes as shown without a grip. The dropout valve is Line SI and has been devolumized (interchangeable with a Line SI Lever changer body) and the back bottle valve is unknown (CooperT?). Also includes a full spring kit, spare cup seal, Line SI #0 and #6 power tubes (no spare retention nut) and the original thumbscrews.
The anno has quite a bit of pump handle (plastic, unknown brand) wear at the front but otherwise just the usual small dings and idiot marks. The bolt and breach also have a fair bit of wear. Velocity maxes out at mid-low 200s on 12g/bulk CO2/HPA. I tried every spring/powertube combo possible (non adjustable hammer). It would likely need a tighter bore barrel (Doc's Freak XL barrel, Freak the stock barrel or cocker thread the body) and/or heavier hammer. The barrel currently has mylar detent fingers made by someone on here that stop both rollouts and double feeds. The barrel retention thumb screw has also been replaced with a brass one to decrease wear. The safety is non-functional (will fire if on safe). I've replaced the side valve thumb screws with cut down loctited screws to just plug the holes and make valve removal easier.
Looking for *SOLD* $100 CAD *SOLD* plus shipping or try your trade if you're local. I'd like to keep this in Canada for the time being. Can also bring this to the walk-on at Combat Pursuit.
Comes as shown without a grip. The dropout valve is Line SI and has been devolumized (interchangeable with a Line SI Lever changer body) and the back bottle valve is unknown (CooperT?). Also includes a full spring kit, spare cup seal, Line SI #0 and #6 power tubes (no spare retention nut) and the original thumbscrews.
The anno has quite a bit of pump handle (plastic, unknown brand) wear at the front but otherwise just the usual small dings and idiot marks. The bolt and breach also have a fair bit of wear. Velocity maxes out at mid-low 200s on 12g/bulk CO2/HPA. I tried every spring/powertube combo possible (non adjustable hammer). It would likely need a tighter bore barrel (Doc's Freak XL barrel, Freak the stock barrel or cocker thread the body) and/or heavier hammer. The barrel currently has mylar detent fingers made by someone on here that stop both rollouts and double feeds. The barrel retention thumb screw has also been replaced with a brass one to decrease wear. The safety is non-functional (will fire if on safe). I've replaced the side valve thumb screws with cut down loctited screws to just plug the holes and make valve removal easier.
Looking for *SOLD* $100 CAD *SOLD* plus shipping or try your trade if you're local. I'd like to keep this in Canada for the time being. Can also bring this to the walk-on at Combat Pursuit.
Comment