11/16 Valves

[nobbie333]

Who can bore out a 2k autococker body to 11/16 valve

[the_hyren]

Who can bore out a 2k autococker body to 11/16 valve

There is no way to do this easily. Its very easy to mis-mill the spring shelf. When this happens the front frame screw will leak. Then you have to pocket the frame and body for orings to seal it. I would just run an inception designs volumizer if you feel the need for more volume.

Sent from my LG-H931 using Tapatalk

[nobbie333]

That is part of the reason why I am asking who can do it
I can’t put a volumizer on it because one is a pump and the other has a lpr where that would go

[BenoitOWN]

I think inception design pump have a volumizer build in the pump.

[nobbie333]

I will be using the best pump kit
The best pump kit is slice

[the_hyren]

That is unfortunate. Im not sure who would have the time but I would recommend reaching out to Jason Antle or Docs Machine. These are the only 2 guys I can think of off the top of my head that I know have the skills.

Sent from my LG-H931 using Tapatalk

[Knuckle Dragger]

I had Angry Antle bore out an Orracle body for me. He didn’t break through the front frame screw hole. He did ask I sent the valve I’m going to use with the body.