[MOTM] April: Custom Works

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Riot
    Malört Acquired
    • Jul 2020
    • 2467

    #1

    [MOTM] April: Custom Works

    April: Custom Works
    Built by you, or anyone else, as long as it's a custom job that you currently own!

    I happen to be on the forums now, so i'll get it going, but Frmrspec should be taking over this MOTM for the next few rounds!

    Yes, you can reenter a marker that you’ve previously entered.
    No, you can not enter a marker that has previously won.


    Rules Week One:
    Post up any marker you have that fits into the category.
    You MUST own the marker.
    One marker per person.
    One picture per marker.
    A little detail on the build is encouraged, but not necessary.

    Week Two:
    I will post up that Phase II is starting.
    Each member may nominate one of the previously posted markers.
    You may NOT nominate yourself.
    Each marker only needs ONE nomination to move on.

    *For weeks one and two please keep all posts to pictures of your entry and nominations, week one and two, respectively. Comments on posts are fine, they don't complicate the contest any.

    Weeks Three & Four:
    I will create a second thread labeled "[POLL]." This is where you can cast your votes and post anything you'd like!
    You MAY vote for yourself here.
    The winner of the poll will move on to the Marker of the Year contest on January 1, 2026.

    Additional Information:
    If you win the monthly contest, you must STILL own the marker for the Marker of the Year contest. If it is sold, it will no longer be eligible for the contest.
    You can use the same marker in multiple contests, as long as fits the category. (Probably doesn't really apply this year, since it's brands)


    If you have any questions about the contest or about an entry you'd like to put in... Please feel free to PM.

    PLEASE, have your entries in by the 7th, at noon (EST), each month! (Set a reminder!)



    Let's gooooo!​​​​​​

    ​​​
  • cougar20th
    MCB Member
    • Jul 2020
    • 1083
    • Amherst NH

    #2
    My Stockclass Pumpmag.

    Did the feed mod myself, the only red m86 I had made. Taso rail. Cerburus pumpkit, CCI stock, CCI bucket changer

    Click image for larger version  Name:	WFyk2fF.jpg Views:	0 Size:	3.98 MB ID:	677455

    Comment

    • Psycho91
      MCB Member
      • Jul 2020
      • 1248
      • Lexington, SC

      #3
      Damn this makes me wish I never sold my bolt action nelson mutt I built years ago, I think moodog bought it, I need to find a pic of it if anyone has it I'd like to buy it back if possible lol

      Comment

      • Riot
        Malört Acquired
        • Jul 2020
        • 2467

        #4
        The Riotmaker.

        JeeperCreeperCustoms
        Short, Stock n’ Nasty.

        (JC, feel like posting some details? It’s been a while…Lol)
        Attached Files

        Comment


        • JeeperCreeper
          JeeperCreeper commented
          Editing a comment
          Sergison K-frame, double barrel, double detents, removable 5x2 feed, and will very soon be insta-pierce instead of the old shoot to pierce. It has the shoot your own fingers vibe that Riot wanted.
      • superman
        MCB Member
        • Jul 2020
        • 3348
        • Mount Pleasant, SC

        #5
        If i had to pick one at the moment. It would be my trilogy. Started out as a discarded body that someone scratched their initials in and then hydro dipped.
        It still needs windows cut into it, different pump handle, matching back block and anodizing. But for now it goes bang and does the job.



        Build thread. https://www.mcarterbrown.com/forum/p...custom-trilogy

        Shocktech phat rat valve, ccm hammer, shocktech springs, shocktech bolt, sidewinder, ccm frame and mini pump kit.

        Feedneck cut, dual detents, minied, custom spring guide.
        BeardedWorks.com (Your Inception Designs and Shocktech Dealer)
        BW Youtube
        BW Ebay

        BW Email
        I buy Automags and Mag Parts also.

        Comment

        • Roger7pball
          MCB Member
          • Jul 2020
          • 569
          • Arizona Bay

          #6
          Ehm that came as a blank and we turned it into something living.

          Comment

          • Magageddon
            Certified Post Whore
            • Sep 2020
            • 1219

            #7
            My Z grip sydarm pump mag build

            I pump milled the body on my mill, slotted the pump kit mount to clear the z grip trigger guard, added a taso rail, and rebuilt the valve

            Comment


            • Riot
              Riot commented
              Editing a comment
              I want this.

            • Drunkscriblerian
              Drunkscriblerian commented
              Editing a comment
              That...definitely wins the WTF?? award.
          • Chaos
            I'm Comin' To Getcha
            • Jul 2020
            • 849

            #8
            I'm sure you've all seen this by now but if not this is the Loo Two. It started off life as two separate markers a CIP Super stock/Boxgun and a Duckslide Phantom. The Boxgun part of it was already heavily modified when I received it and looked more like a Carter Buzzard with a gas in grip. So I decided to merge the two together. Originally this had a gas in grip but I decided to swap it out with a different frame so I could use the gas in grip on a different marker. I decided I wanted to removable Barrel so then I bought a Carter Buzzard and gutted it to allow this to have one.It has a Sconi Barrel that has been cut down so it will be flush with the end of the slide, the original slide was destroyed since been replaced but the original millwork and modification was done by Luke's Customs, the slide release was made by Luke's Customs. The feed cap was made by Kit and all the annodizing work was done by KMDPB.
            Attached Files

            Comment

            • Ecapnation
              MCB Member
              • Jul 2020
              • 4209
              • South Central Long Island

              #9
              The Peregrine

              ONly not custom parts are the ghost internals, 007 back asa and the Tiberius 12 gram knob. I machined everything else 17 years ago..... Manually! Oh and BMC just freaked the barrel
              Attached Files

              Comment

              • XEMON
                Frenchy is here!
                • Jul 2020
                • 3029
                • Nor Cal

                #10
                Walz beautiful rifle 🤩

                Click image for larger version

Name:	image.png
Views:	574
Size:	389.0 KB
ID:	677576
                Love my brass ... Love my SSR ... Hard choices ...

                XEMON's phantom double sided feed
                Keep your ATS going: Project rATS 2.0
                My Feedback

                Comment

                • Socalpumpballer
                  Bunker Buster
                  • Nov 2020
                  • 202

                  #11
                  Rainman pump rainmaker

                  Comment

                  • NONOBLITUS
                    💀Ragnastock President 💀
                    • Jul 2020
                    • 1960
                    • Connecticut

                    #12
                    Gearheadz “ Phoenix “ double barrel phantom kit for me.
                    Click image for larger version

Name:	IMG_8294.jpg
Views:	547
Size:	2.49 MB
ID:	677608

                    Comment


                    • Super Nova
                      Super Nova commented
                      Editing a comment
                      damn I want one of these kits so bad

                    • NONOBLITUS
                      NONOBLITUS commented
                      Editing a comment
                      It took me years of wanting and waiting to finally get mine.
                  • jpdgas
                    Ancient Tech
                    • Mar 2023
                    • 265
                    • SoCA

                    #13
                    Syndragosa started out as a brown/black fade, and was mostly stock. She's had a few of contributors over the past year. In no particular order:
                    Ano by Ruckus
                    BMC feedneck and barrel freaked
                    CCM lower internals and pump kit
                    DNA hopper and pump handle
                    Mozak trigger frame
                    Odm grips

                    Click image for larger version  Name:	Dragon finished 1.jpg Views:	0 Size:	985.3 KB ID:	677649
                    Last edited by jpdgas; 04-03-2025, 11:39 AM.
                    Feedback

                    Comment

                  • acrewofone
                    Crosman 3357 AGA62 Expert
                    • Jul 2020
                    • 418
                    • Hagerstown Maryland

                    #14
                    I'll just throw this Nelspot 007 in there, in it's stock class configuration.

                    Click image for larger version  Name:	nelspot stock class right.jpg Views:	96 Size:	44.7 KB ID:	678097

                    polished body
                    quick strip slot
                    slotted right side
                    double tapped bolt
                    dual armed pump handle made from broken Nelspot pump handle
                    CCI Paintball red main spring
                    Lapco #6 powertube
                    Lapco valve retaining screw
                    Black Magic valve cup seal
                    WGP trigger shoe
                    Nelspot wire stock
                    7.5” extended barrel
                    back bottle adapter
                    12 gram bucket changer
                    horizontal feed adapter

                    When setup for modified or open class

                    Airsource dual 12gram changer
                    JT Paintball airgun to paintball asa adapter
                    Zap pocket hopper​
                    Last edited by acrewofone; 04-08-2025, 01:50 PM.
                    eBay 2102+/0- Feedback
                    PBNation 182+/0- Feedback
                    Old M. Carter Brown 142+/0- Feedback
                    New M. Carter Brown 6+/0- Feedback
                    Over 2400 all positive transaction feedback.

                    THIS HOUSEHOLD IS SURVIVING CANCER!

                    Comment

                    • JeepDVLZ45
                      South Paw
                      • Aug 2020
                      • 1868
                      • Ragnastock’s 2nd Most Northern Outpost

                      #15
                      Click image for larger version  Name:	IMG_2523.jpg Views:	0 Size:	6.91 MB ID:	677820

                      Click image for larger version  Name:	IMG_2524.jpg Views:	0 Size:	4.45 MB ID:	677819

                      It’s not exactly the VeeTwin I sold (which Chuck E Ducky , I expect to see posted 😉) but I consider it “custom”..started life as a CCM T2 (top pic….only to show the progress)

                      Swapped the top tube, pump handle from oDm, ICD Lever changer, Brass on/off knob, Silencio Ti barrel (flame anodized), and cram n’jam off an S6 (I think) and cerakoting by BareFoot Customs (RIP)
                      JeepDVLZ45's Feedback

                      💀 Team Ragnastock 💀

                      Comment

                      Working...