Hello Y'all,
Some of you may have seen my 3D printed Sheridan pump handle, they are finally available 🥳
There are 2 main type:
- Translucent: those are resin printed with "clear" resin. for the threads, they feature a through bolt design holding a threaded nut.
- Solid: those are ASA, very strong and forgiving material with heat set insert for the threads.
Translucent:
I call them translucent and not clear as they are not "crystal clear",
For now, only PGP length (3") are available.
There is 2 grades of translucent pump handle:
- Grade A: no defect.
- Grade B: they are fully functional, but have some minor cosmetic defect. They most likely have some bubble trapped in the resin.
Examples of both grades pictured bellow. Note that the tint of the print will vary a bit.
Prices include all the fees:
MCB members discount available here
Fitted on a PGP:
Grade A on the left, Grade B on the right, some entrapped air bubble are visible:
Light tint on the left and darker one on the right:
Solid:
I will integrate the older sale thread into this one, until then, the Solid are here:
XEMON's Sheridan Pump Handle (3D printed)
My rules and how I operate:
- No payment due until everything is ready to ship.
- Everything i produce is either made to order or very small batch production, inventory is limited
- Paypal only, NO gift payment, all Paypal fee included.
- I try to ship with a few days of payment.
- I work a full time that requires travel, often at the last minute. This mean that I may not be ready to ship immediately. I will let you know when I can ship when we're there.
As always, don't hesitate to PM me if you have any questions.
Thank you,
X
Some of you may have seen my 3D printed Sheridan pump handle, they are finally available 🥳
There are 2 main type:
- Translucent: those are resin printed with "clear" resin. for the threads, they feature a through bolt design holding a threaded nut.
- Solid: those are ASA, very strong and forgiving material with heat set insert for the threads.
Translucent:
I call them translucent and not clear as they are not "crystal clear",
For now, only PGP length (3") are available.
There is 2 grades of translucent pump handle:
- Grade A: no defect.
- Grade B: they are fully functional, but have some minor cosmetic defect. They most likely have some bubble trapped in the resin.
Examples of both grades pictured bellow. Note that the tint of the print will vary a bit.
Prices include all the fees:
- Grade A: $55 + shipping
- Grade B: $45 + shipping -> all out!
MCB members discount available here
Fitted on a PGP:
Grade A on the left, Grade B on the right, some entrapped air bubble are visible:
Light tint on the left and darker one on the right:
Solid:
I will integrate the older sale thread into this one, until then, the Solid are here:
XEMON's Sheridan Pump Handle (3D printed)
My rules and how I operate:
- No payment due until everything is ready to ship.
- Everything i produce is either made to order or very small batch production, inventory is limited
- Paypal only, NO gift payment, all Paypal fee included.
- I try to ship with a few days of payment.
- I work a full time that requires travel, often at the last minute. This mean that I may not be ready to ship immediately. I will let you know when I can ship when we're there.
As always, don't hesitate to PM me if you have any questions.
Thank you,
X
Comment