Rebuild kits

[Pump&Run]

Wondering who/ where the current sources are if any for rebuild kits for the Sheridan pumpers. I’m saying this with the mindset that the California Store is in a brief shipping freeze.

[BrickHaus]

Well, with Palmers in transition its going to get scarce. We are going to have to start re pressing face seals onto sheridan pierce pins.

My go to as of late is either Bacci, or JGairguns.

there are a few other airgun part resellers you can easily utilize, but thats my go to.

That being said, parts are extremely limited even in those areas.

For the airgun sites, they dont sell sheridan P series or K series parts specifically, but they sell benjamin air rifle parts, benjamin/sheridan parts, and or sheridan parts for other pellet based air rifles. Some parts, but not all parts are cross compatible, you just gotta look through manuals and confirm part numbers.

I just spent 100 bucks at jg airguns.. i got a kp style hammer, back cap, trigger, bolt lug, pringle screw, fresh pierce pin, and hammer spring. Its not cheap to buy from them, but they got the goods I want.. short of a spring guide, but Ill work something out. I wish I would have snagged a second hammer spring.

[Jordan]

Link for pierce pin? I've only found the standard cupseals so far.

[Shaftski]

JG is great for out of production parts. i wish he would take paypal.

[BrickHaus]

Jordan


https://www.jgairguns.biz/e9a-c-78_3...ly-p-8901.html

[Jordan]

Thanks! I'll add one on my next order.

[Shaftski]

crosman 2240 pierce pin assemblies fit and work well as do their co2 chamber plug seals. everything else is an easy to find o-ring.

i actually prefer 2240 pierce pin to any others that i have tried.

[Shaftski]

if you search ebay for 'crosman 2240' you will see a lot of sheridan compatible parts. face seal, pierce pin,springs, etc. Lower tube is same specs as a sheridan, ID is the same and end plug threads are the same. lots of cool brass blingy stuff that will drop right into most sheridans.

[JeeperCreeper]

If you have the component valve, you need a 012 and a 014 for rings. I have noticed a similarity between the Crossman parts as well. The valves are different on the outside, but seem to have the same pierce pin assembly

[spydrmn]

Be aware G&H has ran into issues with the Crossman standard cupseals. They don't seem to like CO2. I don't know about the pierce pin style. We got away from that with our new Magnum Valve design. We utilize an insta pierce in the assembly. For cupseals we use a premium old style autococker cupseal.