Sheridan PGP O Rings

[snapcap]

Thank you for posting the ORing sizes for the PGP....I have a model with the cartridge valve and am looking for the O Rings. I have tried a number of O ring sellers on the web and have to buy a million of them. Can any of you direct me to a site that sells PGP size O rings in small quantities?

Thanks,,,,love this site.....Jim Aprile

[JeeperCreeper]

Local hardware store for small quantities, but for me, it's always been cheaper to buy the 100 packs from the jungle site. How many are you looking for?

[Toestr]

The Oring Store is my go to source for orings. For buna orings you will probably have to buy 50-100 as a minimum order depending on the size and hardness. If you order the more expensive materials (HNBR, urethane, etc) the minimum order will be less.

You could try the plumbing section at a hardware store but you'll have to match the dimensions because they don't list the AS568 inch standard sizing.

[XEMON]

I may have a few kits if you're not in a hurry 😁

[Rolling Thunder 67]

Here's your Cartridge Valve O Ring Hardware Store Conversion Numbers:

113 - 9/16 I.D. X 3/4 O.D. X 3/32 C.S.
112 - 1/2 I.D. X 11/16 O.D. X 3/32 C.S.
016 - 5/8 I.D. X 3/4 O.D. X 1/16 C.S.

Bolt O Ring:

111 - 7/16 I.D. X 5/8 O.D. X 3/32

Hope this helps.

[infamoussmiley]

What are the sizes for the component valve O-Rings?

Warmly,

Smiley

[JeeperCreeper]

012, 014

[Rolling Thunder 67]

012 - 3/8 i.d. X 1/2 o.d. X 1/16 c.s.
014 - 1/2 i.d. X 5/8 o.d. X 1/16 c.s.

[snapcap]

Thank you all for your responses......I have located and purchased a few small bags of o rings for the PGP and have ordered a pack of face seals from Bacci Paintball......this is a great resource for these old PGPs......thanks again ....Snapcap