What Are Your Current Paintball Projects

[Cdn_Cuda]

Out of interest, what are your current paintball projects? Hopefully by sharing we can help move various projects along, re-inspire or just find someone with a common project you’re working in.

Updated for 08/2022:
Current Projects:

1) Restore Evil Omen - consider pumping it
2) Fix Longbow leak
3) Prep ANS X5 cocker for sale.
4) Investigate Spyder/Raven project.

[XEMON]

Those sounds great, keep us posted / make a build threads for them.

Well ... here are the main/most promissing ones:
- PGP/nano cocker with NO front block: 99% done, just need a custom bolt ... just dont seam to find teh motivation ...
- DIY 98 E-bolt ... just starting
- Gryphon with busted shells, might print something ... will see what happens ...

Also got a double barrel that needs to be de-soldered because I screwed up / hanged my mind on how to get at it.

There is a few more, but those are the "cool/new" ones :P

I do need to get a great thanks to DocsMachine for handling the Ice Epic, thanks!

[alpha_q_up]

I have my 7+ automag builds I need to finish lmao
1 XMT Shockwave project that is essentially done just needs anodizing
1 pump mag that's built that just needs anodizing
1 ptp micromag 2k9 build that I need to get some custom milling done and some anodizing then lasering
1 AMMM length XMT ripper build that needs anodizing
1 AMMM length karta body with Dallara rail that needs anodizing
1 lukes custom pump build with his wave bodies(when he eventually gets around to selling them)
1 more pump mag that I want a Tac one or slug body to have custom milled anodizing

I also have a few "custom" project I've always kicked around in my head that I need to eventually get to that include

A wrist/gauntlet pneumag
A ghost flanker/mag fed automag
A hand cannon pistol mag/pump mag

I also have some cocker parts I pretend I'm gonna build but probably won't get to anytime soon

[glaman5266]

That's a lot of anodizing, lol.

[alpha_q_up]

Tell me about it, when I get one done and finished there are 3 that are sitting in its place realistically I should just bite the bullet and get 5 done at once so then I won't have spare money to spend on other builds

[Trbo323]

A crossover
A e framed spyder that won't claro the noid hard enough (yes I replaced the capacitor)
My x valve mag

I think that's all for right now

Sent from my Moto Z (2) using Tapatalk

[glaman5266]

I've got mostly smaller stuff. Mainly getting stuff running or tuned to how I like it.

-PMI Trracer that needs an internal overhaul & a different spring or adjustable bolt to get velocity up. Maybe a Phantom grip block to move the bottle down.
-Piranha SRT with burnt out electronics. I think I'll just get a mech frame and call it good.
-Milled 2k2 BKO. Needs an internal LP hose to get it running. I'd like a clamping feedneck and a front block that accepts cocker LPRs though. But getting it running is good enough for now. I've had this marker for many years (leaving/coming back twice, lol) and I want to use it again.
-Tippmann Pro Carb. It's fine as it is, but there's a bunch of things I wanna do. I just haven't started yet. Internal polishing, o-ring on the hammer face, SL68 trigger spring, grind down the trigger face, etc.
-A 2k3 Angel that I can't figure out. Couldn't adjust the velocity, now it won't shoot. Not sure what it the problems are, but I haven't had time to crack it open yet.

[morpheus]

For me I have a couple small projects as well.

-PGP reseal which is almost done. Waiting on some gun oil before I seal that bad boy up.
- OG 98 custom that needs a paint strip then sent off to get powder coated with a custom paint job. Maybe get a new E-trigger board as well.

[Jordan]

I've got a:

KP2 project - waiting for parts and then some final tweaking/tuning

Dual Ion build - nearly finished, I need to fab a grip mount yet. Then I just need to package everything which is proving... difficult.

[morpheus]

I really am enjoying following the work on that KP2 project. Can't wait to see the final product mate!

[Chappy]

Find time to play again...

[Jonnydread]

The only project I really have in mind right now is my left offset SC Phantom, but I need to source parts before I dive too deep into that. I also need to get off my ass and rebuild the black magic I got from Mr. Hick so I can have some clackyness in my life.

[Seajay]

I'm restoring 3 autocockers.
- a System X Vengeance 2.0(?) functioning but needs new o-rings for the 3 way. Rebuilt the ram and replaced a lot of o-rings.
- ANS Gx3 with an eblade setup. Need to chrono.
- I think a Shocktech something or other body. Beat up needs work.

I also have a newer version of the T15 Magwell for my Phenom that I am working on to feed the magazines better.

I'm also curious about the Lurker Eiegenram for my Intimidator, experimenting with this once all the cockers are field ready.

[Shaftski]

- Restoring my old Angel LCD. Got new feedneck adapter, time to start replacing some seals.
- Got my Stanchy PMI to cocker barrel adapters, so i can run cocker barrels on my maverick project. I may make this an FSR shooter.
- 2k2 cocker conversion to pump. May respring to run unregulated CO2
- get reflex kit reflexing again

[Ecapnation]

Restoration of an Eyeball Engineering Cocker and finishing my over under mag fed double 98

[Jonnydread]

Whoa I forgot about the eyeball cockers, looking forward to seeing that!

[Ecapnation]

Took me better part of a decade to find one to buy.... I found a Westwood faster.

[Grendel]

Pneu-Mag - been hiatus since we initiated a move from MA to SC. I'm down here but busy with work, helping care for grandchild and helping renovate my daughters house so paintball is a distant memory right at the moment.

[William the Third]

My current project is trying to remember all of the projects I've started but never completed. I'll probably never complete it.

[XEMON]

Aaamen ...

[WORR13]

haha this is me too

[Cunha]

I've got a top secret trilogy project, and a ccm project
and a bunch of 98's i plan to rebuild