View Single Post
Old 07-02-2007, 02:24 AM   #8 (permalink)
sdlm
Active Member
 
Join Date: May 2007
Posts: 186
Quote:
Originally Posted by Piccolo View Post
The models can be confusing until you just learn to remove the Speed models from the timeline of the other guns and put them on their own.

LED
LCD
Ir3 03 Speed
A4 04 Speed
A4 Fly
G7 05 Speed
G7 Fly 06 Speed
A1

Before the IR3 there will be no cops or eyes. Ir3 and A4 had cops, A4fly and onwards have eyes.

For the speeds I am not 100% which of the early models have which, as I haven't looked into getting any of them. But the 05 speeds and onward have eyes.

I have an Ir3 with cops and have simply shut it off rather than mess around with it, hasn't given me any problems that way.

Early Models of speeds and A4s have Sensi with LDS. Sensi is the same thing as mem 6 cops II except that they have LDS which is Load Detection System, that detects the static force of the paint while not shooting, so that if there is alot of weight on the sensor (As might happen when a halo winds up or the feedneck is full) it knows it can shoot faster without checking the sensor. At least that is IIRC.... COPS II was always flawless on my teammates IR3, It really seems to either work great or not at all.

The speed is kinda confusing with it's timetable, however I would not put the 03 speed and IR3 together. The IR3 was released in 2001 (model year) and was of the medium pressure angels (Operates around 400, minireg input 6-900psi). The Speed came out much later, and was one of the newer LP angels.

Last edited by sdlm; 07-02-2007 at 02:32 AM.
sdlm is offline   Reply With Quote