View Single Post
Old 04-23-2012, 09:11 PM   #13 (permalink)
MCB Member
c6quad's Avatar
Join Date: Apr 2006
Location: NC

to be honest, if you have to ask, you probably shouldn't try. you'd do it like anything...drill a hole and run a tap through it. the important thing to do is get the hole drilled on center and straight. it's not absolutely critical but try your best. i can't tell you the exact size set screw to use off the top of my head. you should be able to search and find that answer. probably a 5/16th. you could hold it in a vice and hand drill it. i'd use a drill press but don't know if you have one and vice to hold it with on your drill press.
Originally Posted by chlsnk View Post
"Go ahead and strip and cut that puppy down because all you are doing is making mine worth more"
Originally Posted by DSA View Post
Ok choochie, the duck is not troubled, it's dated. The technology is old, it's like 8mm stop motion film reels, nothing will ever replace them, they are nostalgic one of a kind but for today's youth the expectations are CGI.
my feedback
c6quad is offline   Reply With Quote